Uses the power of the projector to emit a wireless radio frequency signal to the Elite Screen electric screen. Compatible only with version 2.0 of the electric retractable screen. Requires 12V from the projector for activation output. Synchronizes the projector's power cycle with the screen. Controls distance up to 24 meters. Operates on either 110 volts or 220 volts.

INSTRUCTIONS:

• Disconnect the power supply from the electric screen.
• Connect the projector's power supply to the activator.
• Connect the activator to the additional power supply of the projector.
• Plug the activator into the socket. (The red light will turn on after connection.)
• Press and hold the ZU12V [Button 1] with a sharp object. (The red light will flash.)
• While holding down [Button 1], simultaneously connect the screen to the power source.
• Continue to hold [Button 1] for 3 seconds. (The red light will continue to flash.)
• After 3 seconds, release [Button 1]. (The light will be solid red.)
• Turn on the projector and the screen will automatically lower.
• After the projector turns off, the screen will automatically retract.
• If the monitored screen does not lower and retract automatically, reset the instructions starting from step 1.

Accessory Type: IR/RF remote controls