593
01
€
Delivery
Tomorrow
Free
shipping cost
From
Tenku
(45)
Description
Specifications
The Audison SR 6.600 car amplifier has 6 channels and operates in Class D. It supports Pre-In and Speaker-In inputs, while the ART function allows it to switch on and off automatically via BTL speaker outputs. The cutoff frequency can be adjusted for each channel group using selectable filters.
- Channels: 6
- Operating class: D
- Input types: Pre-In, Speaker-In
- RMS power: 1120 W total
- RMS output power at 14.4 VDC and 1% THD, 6 channels: 85 W x 4 + 110 W x 2 at 4 Ω, 140 W x 4 + 185 W x 2 at 2 Ω, 140 W x 4 + 300 W x 2 with Ch1-4 at 2 Ω and Ch5-6 at 1 Ω
- RMS output power at 14.4 VDC and 1% THD, 5 channels: 85 W x 4 + 370 W x 1 at 4 Ω, 130 W x 4 + 600 W x 1 at 2 Ω, with Ch5/6 bridged
- RMS output power at 14.4 VDC and 1% THD, 4 channels: 280 W x 2 bridged + 110 W x 2 at 4 Ω, 130 W x 2 + 260 W x 1 + 600 W x 1 at 2 Ω
- RMS output power at 14.4 VDC and 1% THD, 3 channels: 280 W x 2 + 370 W x 1 with Ch5/6 bridged at 4 Ω, 280 W x 2 with Ch1-4 at 4 Ω + 600 W x 1 with Ch5/6 bridged at 2 Ω
- CEA output power at 4 Ω, 1% THD+N and 14.4 V: 75 W x 4 channels + 85 W x 2 channels
- Minimum load impedance: Ch 1-4: 2 Ω, Ch 5-6: 1 Ω, 1+2/3+4 bridged: 4 Ω, 5+6 bridged: 2 Ω
- Power supply: 11–17 VDC
- Fuses: 2 x 30 A
- Efficiency: >87%
- High-level input: Yes
- Low-level input: Yes
- Digital input: No
- ART function: Automatic on/off via BTL speaker outputs, selectable, 1.5–7 VDC
- Remote output: 4–15 VDC (150 mA)
- Remote input: 4–15 VDC (1 mA)
- THD distortion at 100 Hz, 4 Ω and 70% of rated power: 0.05%
- Bandwidth: 10 Hz–42 kHz
- Signal-to-noise ratio: 102 dBA
- Damping factor: A Ch/B Ch: 100, C Ch: 400
- Pre-In input sensitivity: 0.32–8 VRMS
- Pre-In input impedance: >10 kOhm
- Speaker-In input sensitivity: 1.6–40 VRMS
- Speaker-In input impedance: 3 Ohm–100 kOhm, depending on the Polyfuse specifications
- Channel A filters: Full, Hi-pass 50–500 Hz at 12 dB/Oct
- Channel B filters: Full, Hi-pass 50–500 Hz at 12 dB/Oct, Band-pass 50–700 Hz (Hi) / 50 Hz–5 kHz (Lo) at 12 dB/Oct
- Channel C filters: Full, Hi-pass 50–700 Hz at 12 dB/Oct, Lo-pass 50–700 Hz at 12 dB/Oct
- Adjustable crossover: Yes
- Subwoofer volume remote control: −20 to 6 dB
- Weight: 2.52 kg
- Dimensions: 314 x 284 x 155 mm
- Height: 47.4 mm
- Product Number
- 01.02.0010
- Number of Channels
- 6 Channels
- Output Power (4 Ohm)
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.