Skroutz.gr

D3-S4520 SSD 960GB 2.5'' with SATA III Connection
SSD Hard Drives

D3-S4520 SSD 960GB 2.5'' with SATA III Connection

The Intel D3-S4520 SSD has a capacity of 960 GB and is intended for storage in data centers, servers, and computers, as well as for upgrading laptops and desktop computers. It uses TLC NAND memory and...

The Intel D3-S4520 SSD has a capacity of 960 GB and is intended for storage in data centers, servers, and computers, as well as for upgrading laptops and desktop computers. It uses TLC NAND memory and a DRAM-less design, with sequential read speeds of up to 550 MB/s and write speeds of up to 510 MB/s.

  • Capacity: 960 GB
  • Form factor: 2.5"
  • Interface: SATA III...
See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • See all
1331 94 €
You earn a 20,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 20€ κουπόνι με Mastercard

Τα Mastercard Wednesdays είναι εδώ. Κάνε σήμερα μία παραγγελία άνω των 200€ με κάρτα Mastercard* και κέρδισε 20€ κουπόνι για την επόμενη παραγγελία σου άνω των 150€!

Μην ξεχνάς, μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 30€!

Η προσφορά ισχύει μέχρι τα μεσάνυχτα γι' αυτό βιάσου.

*Εξαιρούνται παραγγελίες μέσω Revolut Pay & Klarna

Terms & conditions apply
You earn a 25,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 25€ κουπόνι με Mastercard

Τα Mastercard Wednesdays είναι εδώ. Κάνε σήμερα μία παραγγελία άνω των 200€ με κάρτα Mastercard* και κέρδισε 25€ κουπόνι για την επόμενη παραγγελία σου άνω των 150€!

Μην ξεχνάς, μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 40€!

Η προσφορά ισχύει μέχρι τα μεσάνυχτα γι' αυτό βιάσου.

*Εξαιρούνται παραγγελίες μέσω Revolut Pay & Klarna

Terms & conditions apply
Delivery by Thu, 12 Nov
Free   shipping cost
Sent from Bulgaria
From JAR Computers 4.8 (28)
4.8 (28 reviews)
Bulgaria
6 pieces
See Hard Drives on the page of JAR Computers

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

The Intel D3-S4520 SSD has a capacity of 960 GB and is intended for storage in data centers, servers, and computers, as well as for upgrading laptops and desktop computers. It uses TLC NAND memory and a DRAM-less design, with sequential read speeds of up to 550 MB/s and write speeds of up to 510 MB/s.

  • Capacity: 960 GB
  • Form factor: 2.5"
  • Interface: SATA III (6 Gb/s)
  • Sequential read speed: up to 550 MB/s
  • Sequential write speed: up to 510 MB/s
  • NAND memory type: TLC
  • DRAM design: DRAM-less

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
960 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Performance

Read Speed
550 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
510 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The Intel D3-S4520 SSD has a capacity of 960 GB and is intended for storage in data centers, servers, and computers, as well as for upgrading laptops and desktop computers. It uses TLC NAND memory and a DRAM-less design, with sequential read speeds of up to 550 MB/s and write speeds of up to 510 MB/s.

  • Capacity: 960 GB
  • Form factor: 2.5"
  • Interface: SATA III (6 Gb/s)
  • Sequential read speed: up to 550 MB/s
  • Sequential write speed: up to 510 MB/s
  • NAND memory type: TLC
  • DRAM design: DRAM-less

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
960 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Performance

Read Speed
550 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
510 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
1.331,94 €
Free   shipping cost
Intel