The F&F Wi-MEF-3-200A energy analyzer measures consumption in a three-phase, four-wire installation and mounts on a 35 mm DIN rail. It features an analog display, while Wi-Fi communication operates at 2.4 GHz. Measurements are taken using current transformers with a primary current of 200 A and a secondary current of 30 mA.
- Type: Energy analyzer
- Display: Analog
- Installation: On a 35 mm DIN rail
- Number of phases: Three-phase
- Wiring: 4-wire
- Connectivity: Wi-Fi
- Supply voltage: 3 × 230/400 V AC (-25% to 15%)
- Frequency: 50–60 Hz
- Maximum current of transformers: 200 A
- Secondary current of transformers: 30 mA
- Transformer conductor diameter: Ø24 mm
- Meter accuracy: 1%
- Measuring transformer accuracy: 0.5%
- Meter constant: 1000 imp/kWh
- Wireless communication frequency: 2.4 GHz
- Wireless transmission power (IEEE 802.11n): Up to 20 dBm
- Receiver sensitivity: -98 dBm
- Connection: Screw terminals for stranded conductors up to 2.5 mm² or solid conductors up to 4.0 mm²
- Tightening torque: 0.5 Nm
- Power consumption: Up to 2 W
- Operating temperature: -20 to 50 °C
- Operating humidity, non-condensing: Up to 90%
- Dimensions: 2 modules (35 mm)
- Protection rating: IP20
Specifications
- Type
- Energy Analyzer
- Display Type
- Analog
- Installation Type
- Rail
- Number of Phases
- Three-phase
- Maximum Current
- 200 A
Smart Features
- Connectivity
- Wi-Fi
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.