Work Tables

Vevor Bench, work table, Worktable, Workbench 51x104x122cm

The Vevor workbench has an oak surface and adjustable height from 79 to 104 cm, with 11 height settings. It supports a load of up to 720 kg, while its four swivel polyurethane casters make it easy to...

The Vevor workbench has an oak surface and adjustable height from 79 to 104 cm, with 11 height settings. It supports a load of up to 720 kg, while its four swivel polyurethane casters make it easy to move and lock in place with brakes.

The work surface can be used for tasks such as repairs, painting, drilling, and cutting, as well as a desk or storage table....

See Description & Specifications See Description & Specifications
199 99 €
Delivery by Thu, 12 Nov
18,00 €  
Delivery to your floor available
Do you want it with 13,00 € shipping?
From E-Dructer 4.9 (44)
Χαϊδάρι, Αττικής
1 piece
See Tools Equipment on the page of E-Dructer
Is delivery to a floor free?

Yes, we will carry it up to the floor for you, without any restrictions.

Reviews (1)

Reviews

  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • vortex77
    4
    1 out of 1 members found this review helpful

    + Very good packaging.
    + Electrostatic painting and generally good finish, sturdy wood, quality product.
    + Easy assembly - 30 minutes at a very relaxed pace.
    + Apart from the Allen key included in the package, you will need a Phillips screwdriver and a 13mm wrench.

    - Unfortunately, it is not stable and wobbles from the legs and the wheels. The joints are U-profile, resulting in compression when tightening the screws. One solution is to reverse the extensions (i.e., [ ] instead of ] ]), but it still isn't very stable. I will replace the wheels with adjustable fixed legs (M12) and will return for an update.

    *UPDATE* I replaced the wheels with fixed legs and added galvanized L-profile rods that I got from Leroy (25mm X 25mm X 1.5mm x 2m, two pieces) and a piece of plywood, and the result is very satisfactory. The bench is much more stable.

    Translated from Greek ·
    Did you find this review helpful?
  • + Very good packaging.
    + Electrostatic painting and generally good finish, sturdy wood, quality product.
    + Easy assembly - 30 minutes at a very relaxed pace.
    + Apart from the Allen key included in the package, you will need a Phillips screwdriver and a 13mm wrench.

    - Unfortunately, it is not stable and wobbles from the legs and the wheels. The joints are U-profile, resulting in compression when tightening the screws. One solution is to reverse the extensions (i.e., [ ] instead of ] ]), but it still isn't very stable. I will replace the wheels with adjustable fixed legs (M12) and will return for an update.

    *UPDATE* I replaced the wheels with fixed legs and added galvanized L-profile rods that I got from Leroy (25mm X 25mm X 1.5mm x 2m, two pieces) and a piece of plywood, and the result is very satisfactory. The bench is much more stable.

    Translated from Greek ·
    1
  • See all
Questions

Description & Specifications

The Vevor workbench has an oak surface and adjustable height from 79 to 104 cm, with 11 height settings. It supports a load of up to 720 kg, while its four swivel polyurethane casters make it easy to move and lock in place with brakes.

The work surface can be used for tasks such as repairs, painting, drilling, and cutting, as well as a desk or storage table. The built-in power strip has two AC outlets and two USB-A ports.

  • Surface material: Oak
  • Surface dimensions: 122 × 50.8 cm
  • Surface thickness: 25 mm
  • Adjustable height: 79–104 cm
  • Height settings: 11
  • Maximum load capacity: 720 kg
  • Frame material: Cold-rolled steel
  • Tube wall thickness: 1.5 mm
  • Casters: 4 swivel polyurethane casters with brakes
  • Caster diameter: 76 mm
  • Power strip: 2 AC outlets and 2 USB-A ports
  • Cable length: 3 m
  • Voltage: 220–250 V / 60 Hz
  • Current: 10 A
  • Certification: ETL
  • Color: Brown
  • Product dimensions: 122 × 51 × 104 cm
  • Product weight: 26 kg

Manufacturer

Type
Bench, work table, Worktable, Workbench
Length
51 cm
Width
104 cm
Height
122 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • vortex77
    4
    1 out of 1 members found this review helpful

    + Very good packaging.
    + Electrostatic painting and generally good finish, sturdy wood, quality product.
    + Easy assembly - 30 minutes at a very relaxed pace.
    + Apart from the Allen key included in the package, you will need a Phillips screwdriver and a 13mm wrench.

    - Unfortunately, it is not stable and wobbles from the legs and the wheels. The joints are U-profile, resulting in compression when tightening the screws. One solution is to reverse the extensions (i.e., [ ] instead of ] ]), but it still isn't very stable. I will replace the wheels with adjustable fixed legs (M12) and will return for an update.

    *UPDATE* I replaced the wheels with fixed legs and added galvanized L-profile rods that I got from Leroy (25mm X 25mm X 1.5mm x 2m, two pieces) and a piece of plywood, and the result is very satisfactory. The bench is much more stable.

    Translated from Greek ·
    Did you find this review helpful?
  • + Very good packaging.
    + Electrostatic painting and generally good finish, sturdy wood, quality product.
    + Easy assembly - 30 minutes at a very relaxed pace.
    + Apart from the Allen key included in the package, you will need a Phillips screwdriver and a 13mm wrench.

    - Unfortunately, it is not stable and wobbles from the legs and the wheels. The joints are U-profile, resulting in compression when tightening the screws. One solution is to reverse the extensions (i.e., [ ] instead of ] ]), but it still isn't very stable. I will replace the wheels with adjustable fixed legs (M12) and will return for an update.

    *UPDATE* I replaced the wheels with fixed legs and added galvanized L-profile rods that I got from Leroy (25mm X 25mm X 1.5mm x 2m, two pieces) and a piece of plywood, and the result is very satisfactory. The bench is much more stable.

    Translated from Greek ·
    1
  • See all
199,99 €
18,00 €  
Delivery to your floor available