Tetralux Tilelux water-based paint is designed for wall tiles in damp areas, such as bathrooms and shower stalls. It has a satin finish and, when used with STEPlus, adheres even to glossy tiles. It resists moisture, bathroom and cleaning products, and alternating hot and cold water.
Apply without primer using a roller or brush in two coats; depending on the shade and the surface gloss, a third coat may be required. Before application, mix STEPlus into the paint, stirring thoroughly for about 5 minutes. Use the mixture within 10 days. After application, optimal performance and adhesion are achieved in 15–20 days; during this period, avoid impacts, rubbing and cleaning the surface.
- Type: Water-based paint for wall tiles
- Colour: Blue
- Gloss level: Satin
- Volume: 750 ml
- Additive: STEPlus
- Dilution: 10–15% with water
- Application: With a roller or brush
- Coats: 2, with the option of a third depending on the shade and surface gloss
- Coverage: Approximately 12–14 m²/l on properly prepared surfaces
- Application temperature: 12–25 °C
- Cleaning painted surfaces: With a mild detergent and a soft sponge
- Cleaning tools: Immediately after application with water and, if needed, detergent
Specifications
- Type
- Colour
- Colour
- Blue
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Be the first to leave a comment!