This gelcoat finishing putty is made with isophthalic resins, allowing for the application of layers with very good mechanical and thermal properties in a non-aggressive environment.

• Very good mechanical and thermal properties
• Good weather conditions and UV resistance
• Application flexibility

Add 1.5 to 2% PMEC hardener to the gelcoat and mix well. On a clean, dry, and degreased surface, apply a layer of 0.6 to 0.8 mm. The product takes about 7 minutes at 20°C to form a gel. It can be applied on polyester resin or polyester putty after sanding, for larger repairs. Full curing is achieved in 5 hours at 20°C. It can be thinned if necessary with 5% Acetone.