Skroutz.gr

TP-LINK TL-SG1005P-PD Unmanaged L2 PoE Switch with 5 Gigabit (1Gbps) Ethernet Ports
Switches

TP-LINK TL-SG1005P-PD Unmanaged L2 PoE Switch with 5 Gigabit (1Gbps) Ethernet Ports

The TP-LINK TL-SG1005P-PD v1 unmanaged Layer 2 switch expands a wired network with five Gigabit Ethernet ports. It is powered exclusively via PoE, while four ports provide PoE to connected devices....

The TP-LINK TL-SG1005P-PD v1 unmanaged Layer 2 switch expands a wired network with five Gigabit Ethernet ports. It is powered exclusively via PoE, while four ports provide PoE to connected devices. Extend Mode transmits data and power over distances of up to 250 m through ports 1 and 2, while PoE Auto Recovery reboots unresponsive PoE devices.

The metal...

See full description See full description
49 00 €
Delivery by Thu, 05 Nov
2,50 € to a Skroutz Point
Do you want it with Free shipping?
From Etimi 4.9 (10)
4.9 (10 reviews)
Ωραιόκαστρο, Θεσσαλονίκης
11 pieces
See Networking on the page of Etimi
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

The TP-LINK TL-SG1005P-PD v1 unmanaged Layer 2 switch expands a wired network with five Gigabit Ethernet ports. It is powered exclusively via PoE, while four ports provide PoE to connected devices. Extend Mode transmits data and power over distances of up to 250 m through ports 1 and 2, while PoE Auto Recovery reboots unresponsive PoE devices.

The metal enclosure can be placed on a desk or mounted on a wall. Its fanless design ensures quiet operation, and no configuration is required.

  • Type: Unmanaged Layer 2 switch
  • Ethernet ports: 5 × 10/100/1000 Mbps RJ45 ports, with auto-negotiation and AUTO MDI/MDIX
  • PoE input: Port 5, compatible with IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Type 3 and IEEE 802.3bt Type 4
  • PoE outputs: Ports 1–4, compatible with IEEE 802.3af and IEEE 802.3at
  • Power supply: PoE only
  • Available PoE power: 66 W with 802.3bt Type 4 input (90 W), 47 W with 802.3bt Type 3 input (60 W), 21 W with 802.3at input (30 W), or 9 W with 802.3af input (15.4 W)
  • Extend Mode: Transmits data and power up to 250 m through ports 1–2
  • PoE Auto Recovery: On ports 1–4
  • Switching capacity: 10 Gbps
  • Packet forwarding rate: 7.44 Mpps
  • MAC address table: 2,000 entries, with automatic learning and aging
  • Standards and protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3x, IEEE 802.1p
  • Network features: IEEE 802.3x Flow Control, 802.1p/DSCP QoS, IGMP Snooping
  • Forwarding method: Store-and-forward
  • Network cables: For 10BASE-T, Category 3, 4 or 5 UTP, or EIA/TIA-568 100 Ω STP; for 100BASE-TX, Category 5 or 5e UTP, or EIA/TIA-568 100 Ω STP; for 1000BASE-T, Category 5, 5e, 6 or higher UTP, or EIA/TIA-568 100 Ω STP, with a maximum length of 100 m in each case
  • Enclosure: Metal, fanless
  • Installation: Desktop or wall-mounted
  • Dimensions: 158 × 101 × 25 mm
  • Maximum power consumption: 2.68 W with a 90 W PoE input and no powered device connected, or 68.59 W with a 90 W PoE input and a 66 W device connected
  • Maximum heat dissipation: 9.112 BTU/h with a 90 W PoE input and no powered device connected, or 233.206 BTU/h with a 90 W PoE input and a 66 W device connected
  • Operating temperature: -30 to 70 °C
  • Operating humidity: 10–90% RH, non-condensing
  • Package contents: Switch and installation guide

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Network Specifications

Type
Unmanaged
Layer
L2
PoE
Yes
PoE Version
802.3af, 802.3bt

PoE Version

Power over Ethernet (PoE) is a technology that allows network switches to simultaneously transmit power and data over Ethernet cables. Before choosing PoE solutions, it is important to know how much power your devices consume.

802.3af
PoE (802.3af) up to 15.4W per port suitable for basic power supply requirements for devices such as IP Phones, Basic IP Cameras, 802.11n AP.
802.3bt
PoE++ (802.3bt) up to 60/90Watt per port suitable for very high power demands of devices such as PTZ HD IP Cameras with heaters, 802.11ax (WiFi 6) AP, Smart building lighting, Sound system, Thin Clients.

Technical Specifications

Ethernet connections
5 Port
Ethernet Speed
1000 Mbps
Switching Speed
10 Gbps
MAC Address Table
2000 entries
Rack mounting
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • CaptainMike93
    5
    CaptainMike93

    Verified purchase

    It easily powers 4 indoor-type Imou cameras with PoE+ (.at/.af) support and can simultaneously receive PoE In from a PoE++ (.bt) injector. The signal is effectively extended over long distances without interruptions in image transmission.

    Translated from Greek ·
    Did you find this review helpful?
  • Ντίπας
    5
    1 out of 1 members found this review helpful
    Ντίπας

    Verified purchase

    What is different about this specialized switch: Like the Conexpro GNT-69P51G6 and Tenda TEG1105PD, Ubiquiti USW Flex Mini, it is not powered from 220V via a transformer. Instead, it draws power from the Ethernet Power-In input, which must come from another compatible POE switch or POE injector. This capability is necessary when there is no access to a 220V outlet at the place where the TP-LINK TL-SG1005P-PD will be installed (e.g. an outdoor area that is not completely dry, or a wall in a room that does not have an outlet, or if you do not want to squeeze in yet another cable).

    The TP-LINK TL-SG1005P-PD has 4 POE+ outputs, and the power it can provide to them depends on the power it receives from the POE In input.

    For example, in my case, the main switch of my network is the SG1005P (POE out). I bought this one to add more than one network outlet in 2 places where 230V power was not available. If 220V outlets were available, I would use a common switch.

    Translated from Greek ·
    Did you find this review helpful?
  • CaptainMike93
    5
    CaptainMike93

    It easily powers 4 indoor-type Imou cameras with PoE+ (.at/.af) support and can simultaneously receive PoE In from a PoE++ (.bt) injector. The signal is effectively extended over long distances without interruptions in image transmission.

    Translated from Greek ·
    0
  • Ντίπας
    5
    Ντίπας

    What is different about this specialized switch: Like the Conexpro GNT-69P51G6 and Tenda TEG1105PD, Ubiquiti USW Flex Mini, it is not powered from 220V via a transformer. Instead, it draws power from the Ethernet Power-In input, which must come from another compatible POE switch or POE injector. This capability is necessary when there is no access to a 220V outlet at the place where the TP-LINK TL-SG1005P-PD will be installed (e.g. an outdoor area that is not completely dry, or a wall in a room that does not have an outlet, or if you do not want to squeeze in yet another cable).

    The TP-LINK TL-SG1005P-PD has 4 POE+ outputs, and the power it can provide to them depends on the power it receives from the POE In input.

    For example, in my case, the main switch of my network is the SG1005P (POE out). I bought this one to add more than one network outlet in 2 places where 230V power was not available. If 220V outlets were available, I would use a common switch.

    Translated from Greek ·
    1
  • See all
Questions

Questions

Do you have a question about the product?

37 users have this product and can help you

Ask for the product

Description & Specifications

The TP-LINK TL-SG1005P-PD v1 unmanaged Layer 2 switch expands a wired network with five Gigabit Ethernet ports. It is powered exclusively via PoE, while four ports provide PoE to connected devices. Extend Mode transmits data and power over distances of up to 250 m through ports 1 and 2, while PoE Auto Recovery reboots unresponsive PoE devices.

The metal enclosure can be placed on a desk or mounted on a wall. Its fanless design ensures quiet operation, and no configuration is required.

  • Type: Unmanaged Layer 2 switch
  • Ethernet ports: 5 × 10/100/1000 Mbps RJ45 ports, with auto-negotiation and AUTO MDI/MDIX
  • PoE input: Port 5, compatible with IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Type 3 and IEEE 802.3bt Type 4
  • PoE outputs: Ports 1–4, compatible with IEEE 802.3af and IEEE 802.3at
  • Power supply: PoE only
  • Available PoE power: 66 W with 802.3bt Type 4 input (90 W), 47 W with 802.3bt Type 3 input (60 W), 21 W with 802.3at input (30 W), or 9 W with 802.3af input (15.4 W)
  • Extend Mode: Transmits data and power up to 250 m through ports 1–2
  • PoE Auto Recovery: On ports 1–4
  • Switching capacity: 10 Gbps
  • Packet forwarding rate: 7.44 Mpps
  • MAC address table: 2,000 entries, with automatic learning and aging
  • Standards and protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3x, IEEE 802.1p
  • Network features: IEEE 802.3x Flow Control, 802.1p/DSCP QoS, IGMP Snooping
  • Forwarding method: Store-and-forward
  • Network cables: For 10BASE-T, Category 3, 4 or 5 UTP, or EIA/TIA-568 100 Ω STP; for 100BASE-TX, Category 5 or 5e UTP, or EIA/TIA-568 100 Ω STP; for 1000BASE-T, Category 5, 5e, 6 or higher UTP, or EIA/TIA-568 100 Ω STP, with a maximum length of 100 m in each case
  • Enclosure: Metal, fanless
  • Installation: Desktop or wall-mounted
  • Dimensions: 158 × 101 × 25 mm
  • Maximum power consumption: 2.68 W with a 90 W PoE input and no powered device connected, or 68.59 W with a 90 W PoE input and a 66 W device connected
  • Maximum heat dissipation: 9.112 BTU/h with a 90 W PoE input and no powered device connected, or 233.206 BTU/h with a 90 W PoE input and a 66 W device connected
  • Operating temperature: -30 to 70 °C
  • Operating humidity: 10–90% RH, non-condensing
  • Package contents: Switch and installation guide

Manufacturer

Manufacturer Details

Warnings & Safety Information

Network Specifications

Type
Unmanaged
Layer
L2
PoE
Yes
PoE Version
802.3af, 802.3bt

PoE Version

Power over Ethernet (PoE) is a technology that allows network switches to simultaneously transmit power and data over Ethernet cables. Before choosing PoE solutions, it is important to know how much power your devices consume.

802.3af
PoE (802.3af) up to 15.4W per port suitable for basic power supply requirements for devices such as IP Phones, Basic IP Cameras, 802.11n AP.
802.3bt
PoE++ (802.3bt) up to 60/90Watt per port suitable for very high power demands of devices such as PTZ HD IP Cameras with heaters, 802.11ax (WiFi 6) AP, Smart building lighting, Sound system, Thin Clients.

Technical Specifications

Ethernet connections
5 Port
Ethernet Speed
1000 Mbps
Switching Speed
10 Gbps
MAC Address Table
2000 entries
Rack mounting
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • CaptainMike93
    5
    CaptainMike93

    Verified purchase

    It easily powers 4 indoor-type Imou cameras with PoE+ (.at/.af) support and can simultaneously receive PoE In from a PoE++ (.bt) injector. The signal is effectively extended over long distances without interruptions in image transmission.

    Translated from Greek ·
    Did you find this review helpful?
  • Ντίπας
    5
    1 out of 1 members found this review helpful
    Ντίπας

    Verified purchase

    What is different about this specialized switch: Like the Conexpro GNT-69P51G6 and Tenda TEG1105PD, Ubiquiti USW Flex Mini, it is not powered from 220V via a transformer. Instead, it draws power from the Ethernet Power-In input, which must come from another compatible POE switch or POE injector. This capability is necessary when there is no access to a 220V outlet at the place where the TP-LINK TL-SG1005P-PD will be installed (e.g. an outdoor area that is not completely dry, or a wall in a room that does not have an outlet, or if you do not want to squeeze in yet another cable).

    The TP-LINK TL-SG1005P-PD has 4 POE+ outputs, and the power it can provide to them depends on the power it receives from the POE In input.

    For example, in my case, the main switch of my network is the SG1005P (POE out). I bought this one to add more than one network outlet in 2 places where 230V power was not available. If 220V outlets were available, I would use a common switch.

    Translated from Greek ·
    Did you find this review helpful?
  • CaptainMike93
    5
    CaptainMike93

    It easily powers 4 indoor-type Imou cameras with PoE+ (.at/.af) support and can simultaneously receive PoE In from a PoE++ (.bt) injector. The signal is effectively extended over long distances without interruptions in image transmission.

    Translated from Greek ·
    0
  • Ντίπας
    5
    Ντίπας

    What is different about this specialized switch: Like the Conexpro GNT-69P51G6 and Tenda TEG1105PD, Ubiquiti USW Flex Mini, it is not powered from 220V via a transformer. Instead, it draws power from the Ethernet Power-In input, which must come from another compatible POE switch or POE injector. This capability is necessary when there is no access to a 220V outlet at the place where the TP-LINK TL-SG1005P-PD will be installed (e.g. an outdoor area that is not completely dry, or a wall in a room that does not have an outlet, or if you do not want to squeeze in yet another cable).

    The TP-LINK TL-SG1005P-PD has 4 POE+ outputs, and the power it can provide to them depends on the power it receives from the POE In input.

    For example, in my case, the main switch of my network is the SG1005P (POE out). I bought this one to add more than one network outlet in 2 places where 230V power was not available. If 220V outlets were available, I would use a common switch.

    Translated from Greek ·
    1
  • See all
49,00 €
2,50 € to a Skroutz Point