TILELUX is a specially designed high-quality satin water paint for wall tiles. Its composition and the use of the special additive STEPlus make it unique for coloring surfaces made of tiles that are exposed to particularly challenging and humid environments. It is characterized by excellent adhesion even on glossy tiles (>6Mpa) and exceptional resistance to wet environments, the use of shampoos, shower gels, classic cleaning products, descaling products, diluted bleach, white vinegar, and the alternation of hot-cold water usage. It is a unique solution for bathroom and shower renovations.

Features-Properties

• Easy application
• Excellent finish
• No priming required
• Excellent adhesion
• Exceptional resistance to wet environments
• Exceptional resistance to cleaning products, bathroom products, and the alternation of hot-cold water

Usage Instructions:

• Add the special additive STEPlus and stir very well for about 5 minutes.
• Dilution: 10-15% with water
• Application: Apply TILELUX in two coats using a roller or brush. A third coat may be necessary depending on the shade and gloss of the surface.
• Coverage: Approximately 12-14 m²/l on properly prepared surfaces.

General Remarks:

• For the best possible result, it is recommended to use the color mixture with the special additive STEPlus within 10 days.
• The product is applied under room temperature conditions, from 12°C to 25°C.
• The optimal performance and adhesion of the product are achieved after 15-20 days from application.
• Avoid direct impact, friction, and cleaning of the surface during this period.
• To clean painted surfaces, use a mild detergent and a soft sponge.
• Wash tools immediately after application with water and detergent (if necessary).