Skroutz.gr

City Pumps Pump Drilling 0.75hp 49480406WI5I
Submersible Water Pumps

City Pumps Pump Drilling 0.75hp 49480406WI5I

CITY PUMPS is the Premium series of PEDROLLO, a member of the PEDROLLO GROUP.

  • Pump Type: Radial flow
  • Usage: Clean water
  • For drilling diameter: 4"-100mm
  • Power: 0.75 Hp
  • Discharge outlet diameter: 1...

CITY PUMPS is the Premium series of PEDROLLO, a member of the PEDROLLO GROUP.

  • Pump Type: Radial flow
  • Usage: Clean water
  • For drilling diameter: 4"-100mm
  • Power: 0.75 Hp
  • Discharge outlet diameter: 1 1/4" - 32mm
  • Max head: 46M
  • Max flow rate: 6m3/h
  • Body material: Stainless steel AISI 304
  • Impeller material: Plastic (NORYL)
  • Liquid temperature: 35°C
  • Additional...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    46

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
199 00 €
199 Coins 199 Coins
Delivery Wed, 01 Jul - Fri, 03 Jul
Free   shipping cost
From Malliotakis
Ηράκλειο Κρήτης, Ηρακλείου
See Water Pumps on the page of Malliotakis
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

CITY PUMPS is the Premium series of PEDROLLO, a member of the PEDROLLO GROUP.

  • Pump Type: Radial flow
  • Usage: Clean water
  • For drilling diameter: 4"-100mm
  • Power: 0.75 Hp
  • Discharge outlet diameter: 1 1/4" - 32mm
  • Max head: 46M
  • Max flow rate: 6m3/h
  • Body material: Stainless steel AISI 304
  • Impeller material: Plastic (NORYL)
  • Liquid temperature: 35°C
  • Additional features: It has a floating impeller
  • Net weight: 3.6Kg
  • Product length: 9.8cm
  • Product width: 9.8cm
  • Product height: 31.6cm
  • Maximum sand content: 200g/m3
  • Max RPM: 2900RPM

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
2900 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
46 m

Maximum Head Height: 46


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Maximum Particle Size
31.75 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

CITY PUMPS is the Premium series of PEDROLLO, a member of the PEDROLLO GROUP.

  • Pump Type: Radial flow
  • Usage: Clean water
  • For drilling diameter: 4"-100mm
  • Power: 0.75 Hp
  • Discharge outlet diameter: 1 1/4" - 32mm
  • Max head: 46M
  • Max flow rate: 6m3/h
  • Body material: Stainless steel AISI 304
  • Impeller material: Plastic (NORYL)
  • Liquid temperature: 35°C
  • Additional features: It has a floating impeller
  • Net weight: 3.6Kg
  • Product length: 9.8cm
  • Product width: 9.8cm
  • Product height: 31.6cm
  • Maximum sand content: 200g/m3
  • Max RPM: 2900RPM

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
2900 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
46 m

Maximum Head Height: 46


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Maximum Particle Size
31.75 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

199,00 €
Free   shipping cost