Skroutz.gr

Electric Pulse Sander 300W with Speed Control and with Suction System 02012765

20% discount with coupon!

Sanders

Electric Pulse Sander 300W with Speed Control and with Suction System 02012765

The Bakaji orbital sander runs on a 300 W motor and features six speed settings, from 6,000 to 12,000 rpm. Its 2 mm orbit and 23 x 1.5 cm sanding head are suitable for sanding wood, masonry and other...

The Bakaji orbital sander runs on a 300 W motor and features six speed settings, from 6,000 to 12,000 rpm. Its 2 mm orbit and 23 x 1.5 cm sanding head are suitable for sanding wood, masonry and other materials.

The built-in dust extraction system collects dust in a removable container that is easy to empty. The soft, ergonomic handle features a rubber...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • See all
49 90 €
20% discount with a coupon from E-Dructer
applied directly to your cart

Deals & Benefits

20% coupon from the shop E-Dructer until 08/11!

The coupon can be redeemed:

  • Excluding items made by Vevor
  • Excluding items in Christmas Trees, Christmas Accessories,...
  • Exclusively for items sold by E-Dructer
  • Only for a cart with value at least 120€
  • The maximum discount cannot exceed 100€
Delivery by Wed, 11 Nov
2,50 € to a Skroutz Point
Do you want it on Tuesday with Free shipping?
From E-Dructer 4.9 (45)
4.9 (45 reviews)
Χαϊδάρι, Αττικής
1 piece
See Power Tools on the page of E-Dructer

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The Bakaji orbital sander runs on a 300 W motor and features six speed settings, from 6,000 to 12,000 rpm. Its 2 mm orbit and 23 x 1.5 cm sanding head are suitable for sanding wood, masonry and other materials.

The built-in dust extraction system collects dust in a removable container that is easy to empty. The soft, ergonomic handle features a rubber coating, while the sanding belt is secured to the head with clips. The package includes 10 sanding belts: 5 with a grit of 80 and 5 with a grit of 120.

  • Type: Orbital sander
  • Power supply: Mains-powered
  • Power: 300 W
  • Speed: Adjustable, 6,000–12,000 rpm
  • Orbit: 2 mm
  • Head dimensions: 23 x 1.5 cm
  • Dust extraction system: Built-in, with removable dust collection container
  • Handle: Ergonomic, with rubber coating
  • Belt attachment: Secured to the head with clips
  • Package contents: 10 sanding belts, 5 with a grit of 80 and 5 with a grit of 120

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Bakaji orbital sander runs on a 300 W motor and features six speed settings, from 6,000 to 12,000 rpm. Its 2 mm orbit and 23 x 1.5 cm sanding head are suitable for sanding wood, masonry and other materials.

The built-in dust extraction system collects dust in a removable container that is easy to empty. The soft, ergonomic handle features a rubber coating, while the sanding belt is secured to the head with clips. The package includes 10 sanding belts: 5 with a grit of 80 and 5 with a grit of 120.

  • Type: Orbital sander
  • Power supply: Mains-powered
  • Power: 300 W
  • Speed: Adjustable, 6,000–12,000 rpm
  • Orbit: 2 mm
  • Head dimensions: 23 x 1.5 cm
  • Dust extraction system: Built-in, with removable dust collection container
  • Handle: Ergonomic, with rubber coating
  • Belt attachment: Secured to the head with clips
  • Package contents: 10 sanding belts, 5 with a grit of 80 and 5 with a grit of 120

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

49,90 €
2,50 € to a Skroutz Point

Bakaji