Skroutz.gr

Yato Water Pump 0.22hp YT-85281
Submersible Water Pumps

Yato Water Pump 0.22hp YT-85281

Key features:

  • Submersion depth: up to 1.5 m
  • Maximum head height: 20 m
  • Maximum flow: 2500 lt/h
  • Cable length: 2 m
  • Without Battery
See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    18V

    It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    20

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
124 95 €

-7% for 3+ products

155 bonus Coins 155 bonus Coins
Delivery by Thu, 24 Sep
Free   shipping cost
Sent from Bulgaria
Add at least 3 of the same or different products from the offer and get -7% on every product!

Offer's products

All products in the offer
From Best-Ka
Bulgaria
4 pieces
See Water Pumps on the page of Best-Ka
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Capabilities

Submersible well pump from manufacturer Yato, used for pumping clean water from tanks, flooded basements, or for pumping rainwater that does not contain particles.

Features

  • Submersion depth: up to 1.5 m
  • Water delivery height: 20 m
  • Maximum flow: 2500 L/h
  • Pressure: 2 bar
  • Water temperature: up to 35˚C
  • Cable length: 2 m
  • Protection class: IPX8 (pump) / IPX4 (battery box)
  • Insulation class III
  • Minimum suction depth: approximately 10 millimeters
  • Minimum workspace dimensions: 40 x 40 cm
  • Designed to operate with a 2 Ah battery (not included)
  • Voltage: 18 V D.C.
  • Power: 165 W

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Voltage
18V

Voltage

18V

It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 
Horsepower
0.22 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
165 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
2 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
20 m

Maximum Head Height: 20


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
2.5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Capabilities

Submersible well pump from manufacturer Yato, used for pumping clean water from tanks, flooded basements, or for pumping rainwater that does not contain particles.

Features

  • Submersion depth: up to 1.5 m
  • Water delivery height: 20 m
  • Maximum flow: 2500 L/h
  • Pressure: 2 bar
  • Water temperature: up to 35˚C
  • Cable length: 2 m
  • Protection class: IPX8 (pump) / IPX4 (battery box)
  • Insulation class III
  • Minimum suction depth: approximately 10 millimeters
  • Minimum workspace dimensions: 40 x 40 cm
  • Designed to operate with a 2 Ah battery (not included)
  • Voltage: 18 V D.C.
  • Power: 165 W

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Voltage
18V

Voltage

18V

It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 
Horsepower
0.22 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
165 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
2 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
20 m

Maximum Head Height: 20


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
2.5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

124,95 €
Free   shipping cost