High-temperature paint based on special silicone resins, ideal for metal or concrete surfaces and structures exposed to intense heat. It withstands temperatures up to 800°C (non-continuous).

Easy application with a roller, brush, or spray gun. Ready to use, it only requires thinning when applying with a spray gun. Maximum resistance to non-continuous heat is 800°C.

Drying Time:

• 1st Coat (20°C): 1-2 hours
• Full Drying (20°C): 24 hours

Application Areas:

• Hot gas pipes
• Chimneys
• Fireplaces
• Stoves
• Barbecues
• Grills
• Exhausts

Coverage: 12-16 m²/l depending on the surface.

With a satin finish.

Application Recommendations:

• Application temperature between 5 to 35°C.
• Clean the surface from grease, silicone, old paints, or dirt and rust traces, then sand and remove dust.
• Apply the product evenly with a brush or spray gun.
• Allow to dry for 1-2 hours.
• No sanding is required if the second coat is applied within 24 hours of the first.
• If sanding is needed, use sandpaper 180-220 and then apply the second coat.
• Before use, apply controlled heat (250 °C) for at least 1 hour to promote the curing process and achieve maximum resistance.
• Air drying at room temperature in 24 hours.

Manufacturer: Borma Wachs