Complete wheel repair and painting set. This set includes high-quality products from AVEX. It is made for DIY and can be used by anyone following the instructions included in the package.

• 2 x 400 ml Champion varnish
• 1 x 500 ml Champion waterproofing varnish
• 1 x special filler for aluminum wheels
• 1 x set of disposable gloves
• 1 x set of sandpaper of various grits for surface correction
• 1 x roll of brown tape to protect the tire edge

Application instructions:

1. Carefully clean the wheels to remove dust or grease.
2. Repair the dents on the wheels to create a rough surface for the filler to adhere.
3. Clean again or blow away any metal residues.
4. Stick the tape around the rim, on the tire, to protect against paint fumes.
5. Apply the filler to the dents with a spatula or your fingers (use the gloves from the package).
6. After about 10 minutes, once the filler has hardened, finish the surface with fine sandpaper.
7. If the filler did not cover all the dents, repeat the process until all gaps are filled.
8. After finishing the surface with correction sandpaper, finish with progressively finer sandpaper for preparation before painting.
9. If you want the entire rim to be painted, prepare the whole surface with fine sandpaper.
10. Clean the surface of residue after sanding.
11. Shake the spray paint for about 2 minutes and spray on the wheels with even motions.
12. After 10 - 20 minutes, the next layer of paint can be applied. 2 - 3 layers are recommended for better coverage.
13. After applying the paint layers and allowing them to dry, apply the waterproofing in the same way.
14. For a high-gloss finish, apply several layers of waterproofing, allowing drying time between applications.