Wheel repair and painting set, complete and ready to use. It allows for the repair, renovation, and painting of wheels using high-quality products from AVEX. It is a DIY set that can be used by anyone following the included instructions.

The set includes:

• 4 x 400 ml Champion spray paint
• 1 x 500 ml Champion cleaning spray
• 1 x special filler for aluminum wheels
• 1 x set of disposable gloves
• 1 x set of sandpaper with various grits for surface correction before and after applying the filler
• 1 x roll of masking tape to protect the edge of the tire

Application instructions:

1. Carefully clean the wheels to remove dust or grease.
2. Repair the dents on the wheels to create a rough surface for the filler to adhere to.
3. Clean again or blow off any metallic residues.
4. Apply masking tape around the wheel, over the tire, to protect it from paint vapors.
5. Apply the filler to the dents with a spatula, wood, or your fingers (use the provided gloves).
6. After about 10 minutes, once the filler has hardened, smooth the surface using fine sandpaper.
7. If the filler hasn't covered all the dents, repeat the process as many times as necessary.
8. Once you finish the surface with correction sandpaper, finish with progressively finer sandpaper to prepare the surface for painting.
9. If you want to paint the entire wheels, prepare the whole surface with fine sandpaper.
10. Clean the wheel surface from any remaining dust after sanding.
11. Shake the spray paint for about 2 minutes and apply it to the wheel, spraying with even motions.
12. After about 10 - 20 minutes of drying, you can apply the next layer of paint. 2 - 3 layers are recommended for optimal coverage.
13. Finally, after applying the layers of paint and letting them dry, apply the cleaner in the same manner as the paint layers.
14. For intense shine, apply several layers of cleaner, with drying breaks between applications.