Skroutz.gr

DDT Single-phase Submersible Pump Motor 3000W
Submersible Water Pumps

DDT Single-phase Submersible Pump Motor 3000W

Technical Specifications:

  • Brand: DDT
  • Maximum Depth: 8 m
  • Maximum Flow: 25 m³/h
  • Discharge Diameter: 2 inches
  • Pump Diameter: 230
  • Maximum Height: 16 m
  • Power Supply Cable Length: 8 m
  • Float Switch: Yes
  • ...

Technical Specifications:

  • Brand: DDT
  • Maximum Depth: 8 m
  • Maximum Flow: 25 m³/h
  • Discharge Diameter: 2 inches
  • Pump Diameter: 230
  • Maximum Height: 16 m
  • Power Supply Cable Length: 8 m
  • Float Switch: Yes
  • Maximum Pressure: 12 bar
  • Power Capacity: 3000 W
  • Mounting System: Metal
  • Rated Voltage: 50 Hz
  • Pump Type: Dirty Water
  • Product Type: Domestic Water Pump with Float...
See full description See full description

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    16

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
114 71 €
115 Coins 115 Coins
Delivery by Mon, 13 Jul
3,50 € to a Skroutz Point
Do you want it with Free shipping?
Sent from Romania
From Dawer 3.9 (3)
3.9 (3 reviews)
Romania
20+ pieces
See Water Pumps on the page of Dawer
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Technical Specifications:

  • Brand: DDT
  • Maximum Depth: 8 m
  • Maximum Flow: 25 m³/h
  • Discharge Diameter: 2 inches
  • Pump Diameter: 230
  • Maximum Height: 16 m
  • Power Supply Cable Length: 8 m
  • Float Switch: Yes
  • Maximum Pressure: 12 bar
  • Power Capacity: 3000 W
  • Mounting System: Metal
  • Rated Voltage: 50 Hz
  • Pump Type: Dirty Water
  • Product Type: Domestic Water Pump with Float Switch
  • Overpressure Protection: Yes
  • Motor Speed: 2800 rpm

The submersible water pump can be used for lifting and distributing clean or dirty water up to 16 m in permanent or temporary installations for: sewage drainage, small irrigation systems, draining or filling pools, water treatment facilities, muddy, rainwater or detergent water, removing water from basements or wells, continuous or periodic toilet drainage, draining living tanks, and pressure connections. The dirty water pump has the following features:

  • Ergonomic design for easy handling and added comfort
  • Reliable sealing elements that protect the motor from moisture, with double oil sealing
  • The pump has optimal weight for stability but is also easy to transport
  • Low power consumption
  • The pump motor is protected from overload in case of overheating
  • Offers high pressure and flow up to 20m height
  • The main body of the pump is made of stainless steel and cast iron
  • The central shaft and bearings are made of carbon steel, and the impeller is made of cast iron
  • Allows automatic operation using a float switch and has the capability for quick shutdown of the pump if the water level falls below the minimum suction level
  • Robotic construction, made from high-quality materials that are lightweight and durable for longer lifespan

Package Contents: Dirty water pump with float switch, User manual, transport box, Universal discharge adapter, 2 inches hose with length of 20m.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
3000 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m
Motor Rotation Speed
2800 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
16 m

Maximum Head Height: 16


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
25 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Technical Specifications:

  • Brand: DDT
  • Maximum Depth: 8 m
  • Maximum Flow: 25 m³/h
  • Discharge Diameter: 2 inches
  • Pump Diameter: 230
  • Maximum Height: 16 m
  • Power Supply Cable Length: 8 m
  • Float Switch: Yes
  • Maximum Pressure: 12 bar
  • Power Capacity: 3000 W
  • Mounting System: Metal
  • Rated Voltage: 50 Hz
  • Pump Type: Dirty Water
  • Product Type: Domestic Water Pump with Float Switch
  • Overpressure Protection: Yes
  • Motor Speed: 2800 rpm

The submersible water pump can be used for lifting and distributing clean or dirty water up to 16 m in permanent or temporary installations for: sewage drainage, small irrigation systems, draining or filling pools, water treatment facilities, muddy, rainwater or detergent water, removing water from basements or wells, continuous or periodic toilet drainage, draining living tanks, and pressure connections. The dirty water pump has the following features:

  • Ergonomic design for easy handling and added comfort
  • Reliable sealing elements that protect the motor from moisture, with double oil sealing
  • The pump has optimal weight for stability but is also easy to transport
  • Low power consumption
  • The pump motor is protected from overload in case of overheating
  • Offers high pressure and flow up to 20m height
  • The main body of the pump is made of stainless steel and cast iron
  • The central shaft and bearings are made of carbon steel, and the impeller is made of cast iron
  • Allows automatic operation using a float switch and has the capability for quick shutdown of the pump if the water level falls below the minimum suction level
  • Robotic construction, made from high-quality materials that are lightweight and durable for longer lifespan

Package Contents: Dirty water pump with float switch, User manual, transport box, Universal discharge adapter, 2 inches hose with length of 20m.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
3000 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m
Motor Rotation Speed
2800 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
16 m

Maximum Head Height: 16


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
25 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

114,71 €
3,50 € to a Skroutz Point