The 2x Pattex FIX Wood 385g set is a professional, one-component adhesive product for indoor use. It ensures permanent bonding of a wide range of materials, replacing screws, nails, wedges, or other adhesives when installing wall pencils and bases, panels, frames, decorative plates, ornamental profiles, wooden strips, door signs, etc.

Product advantages:

• One-component adhesive product
• For absorbent materials
• For indoor use
• Solvent-free - environmentally friendly
• Easy to use and clean
• Waterproof
• Flexible
• Seals gaps in the substrate
• Can be painted
• No aging processes occur

Possible applications:

• Wood
• Plaster
• Ceramics
• Cork
• Styrofoam
• Wood chips
• Gypsum boards

Application method:

1. Carefully clean the surfaces to be bonded from dust, dirt, rust, oil, and substances that reduce adhesiveness. If the substrate has irregularities, it must be leveled. One of the bonded surfaces must be absorbent to achieve adhesion.
2. Cut the tip of the cartridge just above the thread. The outlet tip should be cut at an angle. Place the cartridge in a special gun.
3. Apply the adhesive in lines or dots on the substrate or the material to be bonded. Do not apply adhesive directly to the edges.
4. Bond while the adhesive is wet (approximately 15 minutes, depending on the absorbency of the substrate). After correctly positioning the object, press it firmly to achieve proper adhesion. When bonding materials that are under tension or heavy, they should be supported or possibly immobilized for about 8-24 hours.
5. Fresh stains should be cleaned immediately after use with a dry cloth, followed by acetone or paint solvent. The cured material can only be removed mechanically.
6. Depending on the surfaces being bonded, heavy objects may need to be supported for at least 24 hours.