Pattex FIX Wood 400g is a professional, single-component adhesive for indoor use. It deeply bonds a wide range of materials, replacing screws, nails, plastic supports, or other adhesives during the installation of walls and bases, panels, frames, decorative plates, decorative profiles, wooden strips, signs, etc.

Product advantages:

• SINGLE-COMPONENT ADHESIVE
• For absorbent materials
• For indoor use
• Solvent-free - eco-friendly
• Easy to use and clean
• Waterproof
• Flexible
• Seals gaps in the substrate
• Can be painted
• Does not age

Possible applications:

• Wood
• Gypsum board
• Ceramics
• Cork
• Styrofoam
• Particle board
• Gypsum board*

*Not suitable for bonding PE, PP, Teflon, etc.

Application method:

1. Thoroughly clean the surfaces to be bonded from dust, dirt, rust, oil, and substances that reduce the adhesive's adhesion. If the substrate has irregularities, they should be smoothed out. One of the bonded surfaces must be absorbent for the adhesive to adhere. The substrate must be stable. If necessary, neighboring surfaces should be protected with tape before application.
2. Cut the tip of the cartridge just above the thread. The nozzle tip should be cut at an angle. Place the cartridge in a special adhesive gun.
3. Apply the adhesive in lines or dots on the surface or material to be bonded. Do not apply adhesive directly to the edges.
4. Bond while the adhesive is wet (approximately 15 minutes, depending on the absorbency of the substrate). Once the object is positioned correctly, press it firmly to achieve a proper connection. When bonding tense or heavy materials, they should be supported or possibly immobilized for about 8-24 hours.
5. Fresh spots should be cleaned immediately after application with a dry cloth, followed by acetone or varnish solvent. Cured material can only be removed mechanically.
6. Depending on the surfaces to which the items are bonded, it may be necessary to support heavy objects for at least 24 hours.