Skroutz.gr

Skil 3225 CA & 3110 AA Impact Battery Screwdriver Brushless 20V 1x2.5Ah
Power Drill Drivers & Screwdrivers

Skil 3225 CA & 3110 AA Impact Battery Screwdriver Brushless 20V 1x2.5Ah

The Skil 3225 CA & 3110 AA is a cordless impact driver with a brushless motor, an aluminium gearbox and a 1/4" hex bit holder for quick bit changes. It features three speeds and Control Mode,...

The Skil 3225 CA & 3110 AA is a cordless impact driver with a brushless motor, an aluminium gearbox and a 1/4" hex bit holder for quick bit changes. It features three speeds and Control Mode, which starts driving slowly and automatically increases speed and power as the fastener tightens, helping to prevent overtightening. It is suitable for driving...

See full description See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 1

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.
  • See all
129 00 €
Delivery by Wed, 04 Nov
2,50 € to a Skroutz Point
Do you want it with Free shipping?
From Dagiopoulos 3.9 (8)
3.9 (8 reviews)
Καλαμάτα, Μεσσηνίας
In-store pickup available
15 pieces
See Power Tools on the page of Dagiopoulos
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

The Skil 3225 CA & 3110 AA is a cordless impact driver with a brushless motor, an aluminium gearbox and a 1/4" hex bit holder for quick bit changes. It features three speeds and Control Mode, which starts driving slowly and automatically increases speed and power as the fastener tightens, helping to prevent overtightening. It is suitable for driving screws into wood and metal, as well as tightening or loosening bolts.

The PWRCORE 20 battery platform features KeepCool and ActivCell technologies for longer runtime. The 360° LED work light also functions as a torch. The maximum screw diameter is 10 mm. The noise level is approximately 89 dB(A) LpA and 100 dB(A) LWA, while vibration is below 2.5 m/s².

  • Type: Impact driver
  • Power source: Battery
  • Voltage: 20 V
  • Batteries: 1 x 2.5 Ah battery
  • Charger: 2.4 A charger included
  • Motor: Brushless
  • Maximum torque: 250 Nm
  • Speeds: 3, with Control Mode
  • Maximum speed: Up to 1,800 / 2,500 / 3,100 rpm, depending on speed setting
  • Impact rate: Up to 2,450 / 3,400 / 3,950 ipm, depending on speed setting
  • Chuck / Holder: 1/4" HEX bit holder
  • Work light: 360° LED with torch function
  • Weight: 900 g without battery
  • Package contents: Impact driver, 2.5 Ah battery, 2.4 A charger, PH2 bit and belt clip

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Impact Screwdriver

Type

Impact Screwdriver

Suitable for fast screwing and unscrewing even in the hardest building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
1
Battery Voltage
20 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2.5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Features & Functions

Maximum Motor Speed
3100 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
250 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
-

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
900 gr

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions

Questions

Do you have a question about the product?

4 users have this product and can help you

Ask for the product

Description & Specifications

The Skil 3225 CA & 3110 AA is a cordless impact driver with a brushless motor, an aluminium gearbox and a 1/4" hex bit holder for quick bit changes. It features three speeds and Control Mode, which starts driving slowly and automatically increases speed and power as the fastener tightens, helping to prevent overtightening. It is suitable for driving screws into wood and metal, as well as tightening or loosening bolts.

The PWRCORE 20 battery platform features KeepCool and ActivCell technologies for longer runtime. The 360° LED work light also functions as a torch. The maximum screw diameter is 10 mm. The noise level is approximately 89 dB(A) LpA and 100 dB(A) LWA, while vibration is below 2.5 m/s².

  • Type: Impact driver
  • Power source: Battery
  • Voltage: 20 V
  • Batteries: 1 x 2.5 Ah battery
  • Charger: 2.4 A charger included
  • Motor: Brushless
  • Maximum torque: 250 Nm
  • Speeds: 3, with Control Mode
  • Maximum speed: Up to 1,800 / 2,500 / 3,100 rpm, depending on speed setting
  • Impact rate: Up to 2,450 / 3,400 / 3,950 ipm, depending on speed setting
  • Chuck / Holder: 1/4" HEX bit holder
  • Work light: 360° LED with torch function
  • Weight: 900 g without battery
  • Package contents: Impact driver, 2.5 Ah battery, 2.4 A charger, PH2 bit and belt clip

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Impact Screwdriver

Type

Impact Screwdriver

Suitable for fast screwing and unscrewing even in the hardest building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
1
Battery Voltage
20 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2.5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Features & Functions

Maximum Motor Speed
3100 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
250 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
-

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
900 gr

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
129,00 €
2,50 € to a Skroutz Point