CHEMICAL ANCHOR 300ML DEN BRAVEN

Applications: Styrene-free polyester adhesives for securing steel anchors to masonry surfaces (M8 to M16) and to reinforced concrete (M8 to M30). Use on: railings, handrails, steps, supports, columns, shelves, fence posts, lighting walls, awnings, air conditioning units, gates, satellite antennas, sinks, bases in concrete (C20/25-C50/60), solid ceramic bricks, perforated bricks, refractory materials, and aerated concrete.

Instructions for use: Create a hole of suitable diameter and depth. Insert the cartridge into the dispenser and fit the mixing nozzle. When starting the application, discard the initial amount of resin until a uniform mixture is obtained. For solid masonry: clean the hole with four cycles using a hand pump and brush, fill the hole with resin up to 2/3 of its depth, starting from the bottom and slowly moving upwards. For porous materials: fill the entire sleeve with resin. Insert the anchor centrally into the hole with a twisting motion. Remove excess resin that has flowed onto the surface and wait until the resin hardens completely. Attach the mounted element and tighten the nut using the required torque (details in technical sheet no. 7.52).