Electric Guitars

Ltd Ex-200 Olympic White Code: EX-200

Η ESP LTD EX-200 Olympic White είναι μία εξάχορδη ηλεκτρική κιθάρα στερεού κορμού (Solid Body) βασισμένη στη χαρακτηριστική γωνιώδη σχεδίαση της σειράς EX. Το σώμα του οργάνου είναι κατασκευασμένο από...

Η ESP LTD EX-200 Olympic White είναι μία εξάχορδη ηλεκτρική κιθάρα στερεού κορμού (Solid Body) βασισμένη στη χαρακτηριστική γωνιώδη σχεδίαση της σειράς EX. Το σώμα του οργάνου είναι κατασκευασμένο από μασίφ μαόνι (Mahogany) με γυαλιστερό φινίρισμα Olympic White και έντονες εργονομικές ακμές. Διαθέτει κολλητό μπράτσο (Set-Neck) τριών τμημάτων από σφένδαμο...

See Description & Specifications See Description & Specifications
Questions

Description & Specifications

Η ESP LTD EX-200 Olympic White είναι μία εξάχορδη ηλεκτρική κιθάρα στερεού κορμού (Solid Body) βασισμένη στη χαρακτηριστική γωνιώδη σχεδίαση της σειράς EX. Το σώμα του οργάνου είναι κατασκευασμένο από μασίφ μαόνι (Mahogany) με γυαλιστερό φινίρισμα Olympic White και έντονες εργονομικές ακμές. Διαθέτει κολλητό μπράτσο (Set-Neck) τριών τμημάτων από σφένδαμο (3-Piece Maple) με λεπτό προφίλ Thin "U" και ταστιέρα από ψημένο jatoba (Roasted Jatoba) ακτίνας 14 ιντσών με 22 τάστα X-Jumbo. Το ηλεκτρικό κύκλωμα ενσωματώνει δύο παθητικούς humbuckers ESP Designed LH-150 με δυνατότητα split-coil μέσω διακόπτη push-pull στο ποτενσιόμετρο τόνου. Το σύστημα στήριξης ολοκληρώνεται με σταθερή γέφυρα Tune-O-Matic, χορδοστάτη Stopbar και σφραγισμένα κλειδιά κουρδίσματος LTD σε μαύρο φινίρισμα hardware.

Basic Features

  • Construction & Series: ESP LTD 200 Series, angular EX Series design
  • Body Type: Solid body with ergonomic contours
  • Body Material: Solid mahogany
  • Neck Construction: Set-neck with a sculpted heel joint
  • Neck Material: 3-piece maple with a gloss finish
  • Neck Profile: Ergonomic Thin "U"
  • Fingerboard Material: Roasted jatoba with white dot inlays
  • Fingerboard Radius & Scale Length: 14" (350 mm) radius with a 24.75" (628 mm) scale length
  • Number & Type of Frets: 22 X-Jumbo frets
  • Nut Material & Width: Molded synthetic, 1.65" (42 mm) wide
  • Bridge Pickup: ESP Designed LH-150B passive humbucker
  • Neck Pickup: ESP Designed LH-150N passive humbucker
  • Control Circuit: 3-way toggle switch, Master Volume and Master Tone with a Push-Pull Coil-Split switch
  • Bridge & Tailpiece: Fixed Tune-O-Matic bridge and stopbar tailpiece
  • Tuning Machines: Sealed LTD die-cast tuners
  • Finish & Hardware: Olympic White Gloss (OW) with black hardware

Mahogany Body Construction & EX Geometry

The body of the LTD EX-200 features the distinctive, aggressive geometry of the EX series and is crafted entirely from selected solid Mahogany. Mahogany provides an acoustic foundation with rich low-mid resonance, a warm tone, and naturally extended sustain. The body’s bold, angular lines are complemented by ergonomic bevels where it meets the body and forearm, ensuring balanced weight distribution and stability when played with a strap. The glossy Olympic White finish provides a smooth surface and durable protection against moisture, perspiration, and surface wear.

3-Piece Maple Thin U Neck & Roasted Jatoba Fingerboard

The neck is made from three parallel sections of maple (3-Piece Maple), a multilayer construction technique that neutralizes internal wood stresses and maximizes structural rigidity against temperature fluctuations. The Set-Neck joint with a sculpted heel ensures direct mechanical coupling with the body and unrestricted access for the left hand up to the 22nd fret. The profile follows the Thin "U" geometry, while the roasted jatoba fingerboard (Roasted Jatoba) features a modern 14" (350 mm) radius, a classic 24.75" (628 mm) scale length, and 22 X-Jumbo frets.

ESP Designed LH-150 Electronics, Coil-Split & Hardware

The electrical circuit features two passive humbuckers, ESP Designed LH-150 (LH-150N at the neck and LH-150B at the bridge). The pickups are designed for high output, clear note separation, and a tight response under high-gain conditions (distortion/gain). The control circuit includes a 3-way toggle switch, Master Volume, and Master Tone with an integrated Push-Pull Coil-Split switch, which splits the pickup coils for clear single-coil tones. The hardware setup is based on a fixed Tune-O-Matic bridge with a stopbar tailpiece for precise intonation adjustment on each string. Combined with the sealed LTD Die-Cast tuners, it ensures excellent tuning stability.

Manufacturer

Product Number
EX-200

Dimensions

Shape
Heavy
Body
-
Neck
-
Fretboard
-
Number of Chords
6
Tremolo
No
Case
-
Set
No
Number of Frets
24
Colour
White

Magnets

Pickups Arrangement
-
Pickups Operation
Passive

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

649,00 € Shipping Cost: Free