Sigmafast 20 Anti-Corrosive Film Hardening Coating 1L - Red Brown

The one-liter package is filled from alternative containers in the original 20-liter can.

SEA TRIAL QUALITY

Professional, fast-drying, anti-corrosive single-coat primer of thick consistency, based on modified alkyd resin, tinted with zinc phosphate. 1 liter.

Suitable for painting defective (rusty) steel surfaces.

A minimum film thickness of 150 microns (2-3 coats) must be applied for full protection of the painted surface.

MAIN ADVANTAGES OF THE PAINT:

• Excellent adhesion even on rust
• High resistance to corrosion and water ingress
• Suitable for protection of welded joints
• Can be recoated with most alkyd, chlorinated, vinyl, epoxy, polyurethane, and automotive paints

TECHNICAL DATA:

• Touch dry: 15 minutes
• Second coat application at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage rate at 50 μm: 11 m²/L
• Gloss: Matt
• Recommended thinner: Sigma 21-06 or Solid Thinner 06
• Color: Red Brown

Colors shown on the color chart are indicative and may slightly differ from actual colors due to screen resolution.

In closed and less ventilated areas, use of a mask is recommended due to the volatile odor of the thinner.

Use of a mask with ABE1P3 filters is recommended.