Skroutz.gr

Gmax Pump Waste Water / Sewage 1.2hp
Submersible Water Pumps

Gmax Pump Waste Water / Sewage 1.2hp

Submersible drainage pump for dirty water GMAX Q900B121 with the following features:

  • Power: 0.9 kW / 1.2 hp
  • Voltage: 220V / 50Hz
  • Manometric height: 8.5 m
  • Flow rate: 15.5 m³/h
  • Motor speed: 2850 rpm

...

Submersible drainage pump for dirty water GMAX Q900B121 with the following features:

  • Power: 0.9 kW / 1.2 hp
  • Voltage: 220V / 50Hz
  • Manometric height: 8.5 m
  • Flow rate: 15.5 m³/h
  • Motor speed: 2850 rpm

Suitable for pumping wastewater with particles up to Φ 30-35 mm without abrasives, from septic tanks, houses, garages, and flooded areas, rainwater, and surface...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
128 95 €
129 Coins 129 Coins
Delivery by Mon, 06 Jul
Free   shipping cost
Sent from Bulgaria
From BalkanEnergy (BG)
Bulgaria
20+ pieces
See Water Pumps on the page of BalkanEnergy (BG)
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Submersible drainage pump for dirty water GMAX Q900B121 with the following features:

  • Power: 0.9 kW / 1.2 hp
  • Voltage: 220V / 50Hz
  • Manometric height: 8.5 m
  • Flow rate: 15.5 m³/h
  • Motor speed: 2850 rpm

Suitable for pumping wastewater with particles up to Φ 30-35 mm without abrasives, from septic tanks, houses, garages, and flooded areas, rainwater, and surface water from lakes and rivers. The float is adjustable and can be attached to any point of the pump housing. The pump is made of copper for increased durability and high load resistance, while the housing and impeller are made from durable polyamide PA66GF30 for resistance to chemical effects and mechanical loads. It is equipped with a 10-meter power cable, allowing operation at great depths up to 7 m. The GMAX Q900B121 offers high performance and is suitable for domestic and semi-professional applications.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2850 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
15.5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8.5 m

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Submersible drainage pump for dirty water GMAX Q900B121 with the following features:

  • Power: 0.9 kW / 1.2 hp
  • Voltage: 220V / 50Hz
  • Manometric height: 8.5 m
  • Flow rate: 15.5 m³/h
  • Motor speed: 2850 rpm

Suitable for pumping wastewater with particles up to Φ 30-35 mm without abrasives, from septic tanks, houses, garages, and flooded areas, rainwater, and surface water from lakes and rivers. The float is adjustable and can be attached to any point of the pump housing. The pump is made of copper for increased durability and high load resistance, while the housing and impeller are made from durable polyamide PA66GF30 for resistance to chemical effects and mechanical loads. It is equipped with a 10-meter power cable, allowing operation at great depths up to 7 m. The GMAX Q900B121 offers high performance and is suitable for domestic and semi-professional applications.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2850 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
15.5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8.5 m

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

128,95 €
Free   shipping cost