Skroutz.gr

Gmax Submersible Pump Motor 0.54hp
Submersible Water Pumps

Gmax Submersible Pump Motor 0.54hp

Submersible drainage pump for clean water GMAX Q400121 with important features:

  • Power: 0.4 kW
  • Maximum head: 8 m
  • Maximum flow rate: 9 m³/h
  • Voltage: 220V-50Hz
  • Speed: 2850 rpm
  • Maximum submersion depth:...

Submersible drainage pump for clean water GMAX Q400121 with important features:

  • Power: 0.4 kW
  • Maximum head: 8 m
  • Maximum flow rate: 9 m³/h
  • Voltage: 220V-50Hz
  • Speed: 2850 rpm
  • Maximum submersion depth: 7 m
  • Minimum operating depth: 50 mm
  • Maximum water level after pumping: 40 mm
  • Pipe connection (inner diameter): 25 mm

The pump is intended for pumping water from...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
95 41 €
96 Coins 96 Coins
Delivery by Mon, 27 Jul
3,50 € to a Skroutz Point
Do you want it with Free shipping?
Sent from Bulgaria
From BalkanEnergy (BG)
Bulgaria
20+ pieces
See Water Pumps on the page of BalkanEnergy (BG)
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Submersible drainage pump for clean water GMAX Q400121 with important features:

  • Power: 0.4 kW
  • Maximum head: 8 m
  • Maximum flow rate: 9 m³/h
  • Voltage: 220V-50Hz
  • Speed: 2850 rpm
  • Maximum submersion depth: 7 m
  • Minimum operating depth: 50 mm
  • Maximum water level after pumping: 40 mm
  • Pipe connection (inner diameter): 25 mm

The pump is intended for pumping water from wells, tanks, and basements with rainwater or domestic water. The maintenance-free motor features integrated thermal protection in case of overheating. Designed for pumping domestic water with particles up to Ø 5 mm without abrasives. The compact design and low weight make transport and installation easy. The long 10-meter cable makes this pump suitable for deeper or hard-to-reach areas. The copper winding ensures long life and stable operation, suitable for domestic and semi-professional use.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.54 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
405 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Submersible drainage pump for clean water GMAX Q400121 with important features:

  • Power: 0.4 kW
  • Maximum head: 8 m
  • Maximum flow rate: 9 m³/h
  • Voltage: 220V-50Hz
  • Speed: 2850 rpm
  • Maximum submersion depth: 7 m
  • Minimum operating depth: 50 mm
  • Maximum water level after pumping: 40 mm
  • Pipe connection (inner diameter): 25 mm

The pump is intended for pumping water from wells, tanks, and basements with rainwater or domestic water. The maintenance-free motor features integrated thermal protection in case of overheating. Designed for pumping domestic water with particles up to Ø 5 mm without abrasives. The compact design and low weight make transport and installation easy. The long 10-meter cable makes this pump suitable for deeper or hard-to-reach areas. The copper winding ensures long life and stable operation, suitable for domestic and semi-professional use.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.54 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
405 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

95,41 €
3,50 € to a Skroutz Point