Microwave Motion Sensor 24 V F&F DRM-02-24V

The motion sensor is designed for automatic, timed activation of lighting when the presence of a person or other object is detected. It is suitable for areas such as hallways, courtyards, entrances and roads, garages, and more.

Technical features:

• Power Supply Voltage: 24 V AC/DC
• Maximum Load Current AC-1: 5 A
• Activation Threshold - adjustable: 2÷2000 Lx
• Activation Delay Time: less than 1 s
• Microwave Radiation Frequency: 5.8 GHz
• Maximum Radiation Power: 10 mW
• Detection Range - adjustable (for height 2.5 m): 1÷10 m
• Receiver Activation Time - adjustable: 5 s ÷ 12 min
• Horizontal Detection Field: 360°
• Detection Type: microwave radiation
• Connection: screw terminals 1.0 mm²
• Squeeze Torque: 0.25 Nm
• Power Consumption: 0.9 W
• Operating Temperature: -25 ÷ 50 °C
• Dimensions: Ø103 mm, height: 44 mm
• Insulation: wall-mounted
• Protection Grade: IP40

The sensor can detect motion and automatically activate the lighting. Continuous movement keeps the light on, while the absence of movement triggers the light's turn-off time. The sensor includes a night mode option to prevent activation during the daytime.

The sensor is suitable for indoor use and is unaffected by temperature changes.

Installation:

• Screw off the outer cover of the sensor.
• Remove the two screws and take off the sensor cover.
• Disconnect the power supply.
• Pass the cables through the sealing hose into the sensor mounting base.
• Secure the base to the surface with two screws.
• Connect according to the wiring diagram.
• Adjust the detection area, night switch sensitivity, and activation time.
• Reassemble the sensor housing.