ŚNIEŻKA Supermal Steel Gloss 7001 0.8l - Phthalic Ester Oil Varnish for Wood and Metal
- Varnish resistant to disinfectants*
- Meets the requirements of public and healthcare facilities
- Flame-retardant coating - fire class D-s1, d0
- Resistant to mechanical and atmospheric factors
- Durable and vivid colors
- Excellent coverage and performance
*Tests were conducted on selected disinfectant samples.
The SUPERMAL® varnish is used for decorative and protective painting of wood, wood-based materials, plasters, as well as steel and cast iron elements used indoors and outdoors, such as windows, doors, furniture, fences, claddings, etc. It is recommended for use in residential spaces, permanent patient care facilities in healthcare buildings, permanent residency areas for children and youth in educational buildings, and food storage areas (without direct contact with food).
Surface preparation: The surface must be dry, free from rust, dust, dirt, and other contaminants. Resinous and greasy areas should be cleaned with extraction gasoline. New wooden and wood-based surfaces should be primed with Śnieżka Wood Primer. Wooden surfaces exposed especially to atmospheric conditions should be additionally treated with VIDARON clear wood solvent before applying the primer. New metal surfaces should be primed with fast-drying anti-corrosive Śnieżka Urekor S paint. Worn oil coatings that do not adhere well to the surface must be removed, cleaned from rust, dirt, and other pollutants; if necessary, fill any gaps and make appropriate preparations. Old high-quality coatings should be sanded with fine sandpaper and cleaned from dust.
Product preparation: Stir the varnish well. If necessary, dilute with solvent for phthalic and oil products or painting gasoline to achieve the factory viscosity.
Painting: Apply at surface and ambient temperatures above +10°C and air humidity below 80%, using a flat brush with soft bristles, sponge roller (flock), or spray. Apply the next coat approximately 24 hours later (low temperature and high humidity increase drying time). Clean tools after painting with phthalic oil solvent, General Solvent, or painting gasoline.
Coverage: up to 16 m²/l per coat.
Packaging: 800 ml.
Number of coats: 2.
Application method: flat brush with soft bristles, sponge roller (flock), or spray.
