Special Paint & Additives

Sigmadur 550 Marine Polyurethane Paint Yachts Boats Hulls Ral 5015 4L

Sigmadur 550 polyurethane paint is a topcoat for protecting boats, yachts and canoes with laminate surfaces. It has a glossy finish and retains its colour and gloss, while offering resistance to...

Sigmadur 550 polyurethane paint is a topcoat for protecting boats, yachts and canoes with laminate surfaces. It has a glossy finish and retains its colour and gloss, while offering resistance to weathering, abrasion, moisture, salt, impact, chemicals and petroleum products. It is a solvent-based paint and requires ventilation during and after application.

...

See Description & Specifications See Description & Specifications
96 50 €
Delivery Tue, 17 Nov - Thu, 19 Nov
5,00 €  
Do you want it with Free shipping?
Sent from Poland
From AlkorPaint
Poland
20+ pieces
See Household Painting Supplies & Tools on the page of AlkorPaint
Questions

Description & Specifications

Sigmadur 550 polyurethane paint is a topcoat for protecting boats, yachts and canoes with laminate surfaces. It has a glossy finish and retains its colour and gloss, while offering resistance to weathering, abrasion, moisture, salt, impact, chemicals and petroleum products. It is a solvent-based paint and requires ventilation during and after application.

Before application, the surface must be roughened and thoroughly degreased with Solid Cleaner 05 to improve adhesion. Metal surfaces require Sigmacover 280 primer. Stir the base thoroughly before adding the hardener at a volume ratio of 88:12. Use the mixture within 5 hours at 20 °C.

  • Type: Polyurethane topcoat
  • Use: Protection of boats, yachts and canoes with laminate surfaces
  • Colour: RAL 5015
  • Volume: 4 L
  • Gloss level: Glossy
  • Components: Base and hardener
  • Mixing ratio: 88:12 by volume
  • Pot life after mixing: 5 hours at 20 °C
  • Application methods: Roller, brush or spray
  • Thinning: Up to 5% polyurethane thinner, if required
  • Recommended thinners: Sigma 21-06 or Solid Thinner 06
  • Touch-dry time: 1 hour
  • Recoating time at 20 °C: 6 hours
  • Full curing time at 20 °C: 4 days
  • Recoating time at -5 °C: 24 hours
  • Recoating time at 0 °C: 16 hours
  • Recoating time at 10 °C: 8 hours
  • Recoating time at 30 °C: 5 hours
  • Recoating time at 40 °C: 3 hours
  • Solids content: 55%
  • Recommended film thickness: 50–60 μm
  • Coverage at 50 μm: 11 m²/L

Manufacturer

Specifications

Type
Polyurethane Paint
Acrilyc
No
Luminosity
Glossy

Quantity

Volume
4 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

96,50 €
5,00 €