Quality and properties: 1K primer-filler with very good anti-corrosive protection, acts as both filler and primer, for isolating sanded surfaces. It features a short drying time, very good flow and adhesion. Can be painted over with ColorMatic water-based and solvent-based lacquers as well as 1K and 2K topcoats.
Physical and chemical characteristics:
- Binder: polyvinyl butyral
- Color: black
- Odor: solvent
- Coverage: 400 ml is sufficient for approximately 1.0 m²
Substrate: Bare 2K filler surfaces or old 2K paint that has been sanded, sanded and cleaned filler spots, rough and cleaned factory paints, factory or old paints, and almost all plastics.
Drying time (at 20°C, 50% relative humidity):
- Dust dry: 8–10 minutes
- Touch dry: 15 minutes
- Fully dry: 30–40 minutes
- Ready for recoating: 15–20 minutes
Temperature resistance: up to 250°C.
Shelf life: 10 years if stored properly (10°–25°C, maximum relative humidity 60%).
Container/Content: Spray, maximum nominal volume 400 ml.
VOC value: 168.6 g.
Warning word: Danger.
Hazardous ingredients: 1-propanol, product return: bisphenol-A-(epichlorhydrin) epoxy resin, butanol, acetone.
Hazard statements:
- Extremely flammable aerosol.
- Pressurized container. May burst if heated.
- Causes skin irritation and serious eye irritation.
- May cause an allergic skin reaction, drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat, sparks, open flames and hot surfaces. No smoking. Wear protective gloves and personal eye protection.
- Suitable for
- Plastic, Leather
- Spray Type
- Primer
- Capacity
- 400 ml
- Colour
- Grey
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.