30 € coupon for your next purchase!

Special Paint & Additives

Sigmadur 520 Marine Paint Semi-Gloss Yachts Boats 20L RAL 5011

Sigmadur 520 polyurethane paint is an acrylic polyurethane, aliphatic, two-component paint with a semi-gloss finish. It is applied as a topcoat on boats and metal structures, and is suitable for...

Sigmadur 520 polyurethane paint is an acrylic polyurethane, aliphatic, two-component paint with a semi-gloss finish. It is applied as a topcoat on boats and metal structures, and is suitable for painting surfaces above and below the waterline, as well as for direct protection of steel plates.

It is resistant to weathering, abrasion, moisture, salt and...

See Description & Specifications See Description & Specifications
416 99 €
Delivery Fri, 27 Nov - Tue, 01 Dec
19,00 €  
Do you want it with 14,00 € shipping?
Sent from Poland
From AlkorPaint
Poland
20+ pieces
See Household Painting Supplies & Tools on the page of AlkorPaint
Questions

Description & Specifications

Sigmadur 520 polyurethane paint is an acrylic polyurethane, aliphatic, two-component paint with a semi-gloss finish. It is applied as a topcoat on boats and metal structures, and is suitable for painting surfaces above and below the waterline, as well as for direct protection of steel plates.

It is resistant to weathering, abrasion, moisture, salt and impact, as well as splashes of mineral and vegetable oils, paraffin, aliphatic petroleum products and moderately aggressive chemicals. It retains its colour and gloss without chalking or yellowing and can be recoated without a time limit. When used as a primer in industrial paint systems, it is recommended for better coverage with yellow, red and orange colours.

Before use, mix the base thoroughly and add the hardener at a volume ratio of 88:12. At 20 °C, use the mixture within 5 hours. Apply by roller, brush or spray; up to 5% polyurethane thinner may be added. Sigmacover 280 primer is required on metal surfaces. Before painting, sand, wash and degrease the surface with Solid Cleaner 05. In enclosed spaces with inadequate ventilation, a mask with ABE1P3 filters is recommended.

  • Type: Two-component polyurethane paint
  • Composition: Aliphatic acrylic polyurethane
  • Volume: 20 L
  • Colour: RAL 5011
  • Finish: Semi-gloss
  • Suitable for: Boats and metal structures
  • Curing temperature: Down to -5 °C
  • Touch-dry time: 1 hour
  • Recoat time at 20 °C: 6 hours
  • Full cure time: 4 days
  • Solids content: 58%
  • Recommended film thickness: 50–75 μm
  • Coverage at 50 μm: 11.6 m²/L
  • Recommended thinners: Sigma 21-06 or Solid Thinner 06
  • Recoat interval at -5 °C: 24 hours
  • Recoat interval at 0 °C: 16 hours
  • Recoat interval at 10 °C: 8 hours
  • Recoat interval at 20 °C: 6 hours
  • Recoat interval at 30 °C: 5 hours
  • Recoat interval at 40 °C: 3 hours

Manufacturer

Specifications

Type
Polyurethane Paint
Colour
Grey
Acrilyc
No

Quantity

Volume
20 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

416,99 €
19,00 €