Sigmadur 520 polyurethane paint is a two-component aliphatic acrylic polyurethane topcoat suitable for boats and yachts. It can be applied to surfaces both above and below the waterline, as well as to steel structures and laminate surfaces. It resists weathering, abrasion, moisture, salt and impact, while retaining its colour and gloss.
Mix the paint with the hardener at a volume ratio of 88:12. At 20 °C, use the mixture within 5 hours of mixing. Apply by roller, brush or spray; up to 5% polyurethane thinner may be added. In enclosed or poorly ventilated spaces, a mask with ABE1P3 filters is recommended.
- Type: Two-component aliphatic acrylic polyurethane paint
- Use: Topcoat for boats, yachts, steel structures and laminate surfaces
- Suitable for: Surfaces above and below the waterline
- Colour: RAL 9005
- Finish: Semi-gloss
- Volume: 20 l
- Mixing ratio of base and hardener: 88:12 by volume
- Pot life after mixing: 5 hours at 20 °C
- Application methods: Roller, brush or spray
- Thinner: Sigma 21-06 or Solid Thinner 06
- Solids content: 58%
- Recommended dry film thickness: 50–75 μm
- Coverage: 11.6 m²/l at 50 μm
- Touch-dry: 1 hour
- Application of second coat: After 6 hours at 20 °C
- Full cure: 4 days
- Resistance: Weathering, abrasion, moisture, salt, impact, and splashes of mineral oils, vegetable oils, paraffin, aliphatic petroleum products and moderately aggressive chemicals
- Recoating time: 24 hours at −5 °C, 16 hours at 0 °C, 8 hours at 10 °C, 6 hours at 20 °C, 5 hours at 30 °C and 3 hours at 40 °C
Specifications
- Type
- Polyurethane Paint
- Colour
- Grey
- Acrilyc
- No
Quantity
- Volume
- 20 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.