Sigmafast 20 Anti-corrosive Rust Paint 1L - RAL 9010 is a professional, fast-drying, foam anti-corrosive paint based on modified alkyd resin, colored with zinc phosphate. Suitable for painting unfinished (rusty) iron surfaces.

A minimum film thickness of 150 microns (2-3 coats) is required for full protection of the painted surface.

Used and recommended by professionals in the anti-corrosive products industry. Ideal for laboratory protection.

Main advantages of the paint:

• Excellent adhesion even on rust
• High resistance to corrosive effects and water penetration
• Suitable for protection of welded joints
• Can be repainted with most alkyd, chlorinated rubber, vinyl, epoxy coatings, polyurethane, and automotive paints

Technical data:

• Touch dry time: 15 minutes
• Second coat application at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage at 50 μm: 11 m²/L
• Finish: Matte
• Recommended thinner: Sigma 21-06 or Solid Thinner 06

For long-lasting protection that lasts for years, the surface must be ground, washed, and degreased with Solid Cleaner 05 before painting.

Colors from the provided RAL and NCS scales are available at recommended prices. The colors displayed may slightly differ from the actual ones due to screen resolution.

For better coverage, the use of a primer in NCS S 1020-Y20R is recommended for yellow, red, and orange shades.