Marmoline Flex 2200 GEL tile adhesive is a cement-based, resin-modified and flexible adhesive featuring gel technology, reduced slippage and extended open time. Classified as C2TE S1 under EN 12004, it is suitable for tiles of all types and sizes on horizontal and vertical surfaces, indoors and outdoors.
It can be applied to substrates made of concrete, cement mortar, plaster, masonry, cement boards and plasterboard, as well as over existing tiles and mosaic, when used with a quartz primer. It is suitable for underfloor-heated areas, swimming pools and tanks, and for bonding marble, granite, glass mosaics and decorative stone.
- Type: Tile adhesive
- Quantity: 25 kg
- Colour: Grey
- Composition: Portland cement, white marble aggregates, special additives and polymer components
- Classification: C2TE S1
- Standard: EN 12004
- Marking: CE
- Slip: ≤ 0.5 mm
- Open time: 30 minutes
- Adjustment time: 15 minutes
- Maximum application thickness: 10 mm
- Coverage: 2.5–4.0 kg/m², depending on the surface and tile
- Mixing water: Approximately 7 litres per 25 kg bag
- Application temperature: +5 °C to +35 °C
- Floor grouting: Approximately 24 hours at +20 °C
- Wall grouting: Approximately 12 hours at +20 °C
- Certification: EUROFINS Indoor Air Comfort Gold
- Product Number
- 544497
- Type
- Tiles
- Quantity
- 25 kg
- Colour
- Grey
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.