The D-Link DGS-1530-52/E Switch connects devices through 48 Gigabit Ethernet ports and features 4 10G SFP+ uplink ports for link aggregation. It supports Layer 2 features such as VLAN, QoS, Link Aggregation (LACP) and IGMP snooping, as well as limited static routing. With Zero-Touch Provisioning (ZTP), it automatically obtains an IP address from a DHCP server and software and configuration files from a TFTP server.

It supports physical stacking of up to 9 switches via 10G ports, managed through a single IP address. The 1U metal enclosure can be mounted in a rack, while the RJ-45 ports have 6 kV surge protection.

• Ethernet ports: 48 x 10/100/1000BASE-T RJ-45
• Uplink ports: 4 x 10G SFP+
• Console port: 1 x RJ-45
• Network features: Layer 2, VLAN, QoS, Link Aggregation (LACP), IGMP/MLD snooping, ISM VLAN, limited static routing
• Stacking: Up to 9 switches via 10G ports, managed through a single IP address
• Management: Web GUI, CLI, SNMP and compatibility with the Nuclias network controller
• Automatic configuration: Zero-Touch Provisioning (ZTP) via DHCP and TFTP
• Resilience features: Automatic traffic rerouting, hot-swap, RPS and G.8032 ERPS
• Monitoring: Hardware-based delay measurements according to ITU-T Y.1731 and link monitoring according to IEEE 802.1ag
• Surge protection: 6 kV on all RJ-45 Ethernet ports, compliant with IEC61000-4-5
• Switching capacity: 176 Gbps
• Packet forwarding rate: 130.95 Mpps
• Power supply: Built-in power supply, with support for an additional RPS redundant power supply
• Maximum power consumption: 44.1 W
• Cooling: Active, with 2 Smart Fan fans
• Enclosure: 1U metal, rack-mountable
• Dimensions: 440 x 210 x 44 mm
• Weight: 3.2 kg
• Operating temperature: -5 °C to 50 °C
• Storage temperature: -20 °C to 70 °C
• Operating and storage humidity: 0% to 95%, non-condensing