The MOTIP carburetor cleaner spray is an aerosol cleaning product designed to remove dirt and deposits from the intake chamber and visible parts of the carburetor. Quantity: 500 ml

Properties

• Strong solvent that dissolves and removes dirt very quickly
• Powerful spray jet for active cleaning
• Cleans the carburetor and intake chamber without disassembly
• Dissolves rubber, varnishes, and deposits

Applications

• On visible parts of the carburetor (choke and throttle plates, air ducts, adjustment screws, venturi tubes, external parts)
• In the intake chamber of injection systems or carburetor engines
• On the positive crankcase ventilation valve (PCV)

Instructions

• For carburetors: For thorough cleaning (internal and external), use together with WCCL.
• For cleaning visible parts: Remove the air filter. Start the engine and let it warm up. Set the choke to the open position. With the engine warm, spray the product into the intake chamber on dirty areas. Spray in intervals. If necessary, accelerate to prevent the engine from stalling due to mixture enrichment. Continue until all parts are clean.
• Intake chamber: Remove the air filter, warm up the engine, set the choke to the open position. With the engine warm, spray into the intake chamber in intervals. Accelerate if necessary to prevent the engine from stalling. For systems with air flow plates, manually open the plate if needed.
• Automatic choke: Remove the air filter. With the engine off, spray both sides of the choke plate, opening and closing it manually.
• P.C.V. (positive crankcase ventilation): Disconnect the valve from the engine. Insert the extension tube into the open end of the valve and spray while moving the valve back and forth. Start the engine, spray the valve several times to clean it thoroughly.

Warning

Do not spray on painted surfaces. If this occurs, rinse immediately with water to prevent damage.