Durable water-based acrylic pool paint designed for application on concrete pools. The product is waterproof and breathable, offering high adhesion and easy application. It features high resistance to water and alkalinity, ideal for both indoor and outdoor use.

• Does not chalk
• High resistance to alkalinity and atmospheric conditions
• Suitable for fresh and saltwater pools
• Does not promote the formation of algae and mold
• Alkalinity resistance AFNOR T. 30.003 - FAMILY I CLASS 7b2
• Does not spread flame

Features:

• Finish: Semi-matte
• Shade: White, Blue
• Coverage: 8-11 m²/L (depending on surface absorbency)
• Drying time: 10-30 minutes (20ºC HR: 60%)
• Recoat time: 24 hours (20ºC HR: 60%)
• Pool filling: 8 days depending on weather conditions
• Thinning/Cleaning tools: Water

Instructions:

1. The concrete must fully harden (minimum 30 days).
2. Clean any corrosion with water jetting.
3. Neutralize alkaline spots.
4. For polished surfaces: sand to open pores.
5. Remove any unusual materials from the surface.
6. Repair decayed and defective spots using the appropriate filler.

Application Instructions:

Mix thoroughly until the mixture is homogeneous. For the first coat, dilute the product with water according to the porosity and condition of the surface (20-25%). Finish with one or two lightly diluted coats (5-10%) until the surface is fully covered. Confirm that the paint you will apply is compatible with the previous existing paint. The product is resistant to chlorine and its derivatives if the normal chlorine dosage is followed according to the specified limits.