Prepare the surface to be sprayed with Spray Paints by sanding it with sandpaper to ensure it is clean, dry, and free of grease. Protect the surrounding area from spray mist. After applying primer, shake the container for 2 minutes and spray a test area to check the shade. Spray from a distance of 25-30 cm, apply several thin layers and wait for hardening after 2 hours. After use, turn the can upside down and spray for a few seconds.

Warning word: Danger.

• Hazardous ingredients: Acetone, ethyl acetate, n-butyl acetate, 2-methoxy-1-methylethyl acetate.
• Extremely flammable aerosol. Pressurized container.
• May burst if heated.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.

Precautionary statements:

• If medical advice is needed, have the container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
• Do not smoke.
• Do not spray near open flames or other ignition sources.
• Do not pierce or burn, even after use.
• Do not breathe spray.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50 °C.
• Discard contents/container in accordance with local regulations.

Additional information:

• Prolonged exposure may cause skin dryness or cracking.
• Without adequate ventilation, explosive mixtures may form.
• Spraying may produce hazardous inhalable droplets. Do not breathe spray or droplets.