Skroutz.gr

Fox V3 Solid Black Motorcycle Helmet Motocross DOT / ECE 22.06
Motorcycle Helmets

Fox V3 Solid Black Motorcycle Helmet Motocross DOT / ECE 22.06 Code: 31365-255

Motorcycle Helmet V3 Solid

The V3 Solid helmet offers the perfect balance of safety, performance, and comfort. The Mips technology and the composite fiberglass shell provide high-level coverage while...

Motorcycle Helmet V3 Solid

The V3 Solid helmet offers the perfect balance of safety, performance, and comfort. The Mips technology and the composite fiberglass shell provide high-level coverage while keeping the weight low.

Specifications:

  • Equipped with Multi-directional Impact Protection System (Mips), providing a low-friction layer between the helmet and...
See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    DOT

    Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
380 00 €
380 Coins 380 Coins
Delivery by Fri, 03 Jul
Free   shipping cost
From KRD Stores
Αθήνα, Αττικής
See Rider Equipment on the page of KRD Stores
Do you want to gift it?

You select "Gift order" in the cart. We do not include a receipt in the package and provide an electronic exchange card, just in case.

Review the product
Product report

Description

Description

Motorcycle Helmet V3 Solid

The V3 Solid helmet offers the perfect balance of safety, performance, and comfort. The Mips® technology and the composite fiberglass shell provide high-level coverage while keeping the weight low.

Specifications:

  • Equipped with Multi-directional Impact Protection System (Mips®), providing a low-friction layer between the helmet and the head.
  • Composite fiberglass shell, offering increased impact resistance.
  • 3-position visor with adjustable shear material.
  • MDEPS EPS liner that distributes impact forces over a broader surface area.
  • Proprietary removal system compatible with Eject.
  • Ionic+® lining that wicks moisture away.
  • Speaker pockets compatible with most helmet communication systems.
  • Hydration routing system for staying hydrated while riding.
  • Titanium D-ring strap.

Certifications:

  • DOT and ECE22.06 standards.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
31365-255

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT, ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Motorcycle Helmet V3 Solid

The V3 Solid helmet offers the perfect balance of safety, performance, and comfort. The Mips® technology and the composite fiberglass shell provide high-level coverage while keeping the weight low.

Specifications:

  • Equipped with Multi-directional Impact Protection System (Mips®), providing a low-friction layer between the helmet and the head.
  • Composite fiberglass shell, offering increased impact resistance.
  • 3-position visor with adjustable shear material.
  • MDEPS EPS liner that distributes impact forces over a broader surface area.
  • Proprietary removal system compatible with Eject.
  • Ionic+® lining that wicks moisture away.
  • Speaker pockets compatible with most helmet communication systems.
  • Hydration routing system for staying hydrated while riding.
  • Titanium D-ring strap.

Certifications:

  • DOT and ECE22.06 standards.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
31365-255

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT, ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

380,00 €
Free   shipping cost
Kέρδισε 50€ κουπόνι
Kέρδισε 50€ κουπόνι
Δες πώς εδώ