Skroutz.gr

DDT Single-phase Pump Well 2.93hp
Submersible Water Pumps

DDT Single-phase Pump Well 2.93hp

The submersible dirty water pump is suitable for pumping water containing particles, making it ideal for applications from septic tanks to flooded basements. This pump features an internal impeller...

The submersible dirty water pump is suitable for pumping water containing particles, making it ideal for applications from septic tanks to flooded basements. This pump features an internal impeller that allows the intake of larger particles and is also recommended for suction in sludge or sandy basins. It is suitable for installations where toilets cannot be...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
101 47 €
102 Coins 102 Coins
Delivery by Tue, 18 Aug
5,50 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Do you want it with Free shipping to Skroutz Point?
Sent from Romania
From Dawer 4.0 (4)
4.0 (4 reviews)
Romania
20+ pieces
See Water Pumps on the page of Dawer
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The submersible dirty water pump is suitable for pumping water containing particles, making it ideal for applications from septic tanks to flooded basements. This pump features an internal impeller that allows the intake of larger particles and is also recommended for suction in sludge or sandy basins. It is suitable for installations where toilets cannot be connected to the sewer system, facilitating the connection between the building and the external sewage system.

The pump has a powerful 2.2 kW single-phase motor and can be used in both urban and rural areas. Suitable for continuous or intermittent drainage of toilets, tanks, and septic tanks, it operates automatically in pressure chamber air transportation systems.

It offers the following features:

  • Type of pump: Submersible pump
  • Material: Cast iron
  • Power source: Electric
  • Electricity type: Single-phase
  • Starting type: Automatic
  • Functions: Equipped with impeller and float switch
  • Package contents: 1 x Pump
  • Color: Blue

Technical Specifications:

  • Motor type: Electric
  • Power: 2200 W
  • Maximum speed (rpm): 2860
  • Voltage: 220 V
  • Protection class: IP 68
  • Maximum temperature: 35 °C
  • Discharge connection diameter: 2 inches
  • Suction connection diameter: 2 inches

Performance:

  • Maximum flow rate: 8 m³/h
  • Discharge height: 8 m
  • Suction depth: 8 m

Dimensions:

  • Weight: 12 kg
  • Height: 40 cm
  • Diameter: 270 mm
  • Cable length: 8 m

The package includes:

  • 1 x Submersible pump
  • 1 x 2-inch pipe, 20 m

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2197.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
20 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The submersible dirty water pump is suitable for pumping water containing particles, making it ideal for applications from septic tanks to flooded basements. This pump features an internal impeller that allows the intake of larger particles and is also recommended for suction in sludge or sandy basins. It is suitable for installations where toilets cannot be connected to the sewer system, facilitating the connection between the building and the external sewage system.

The pump has a powerful 2.2 kW single-phase motor and can be used in both urban and rural areas. Suitable for continuous or intermittent drainage of toilets, tanks, and septic tanks, it operates automatically in pressure chamber air transportation systems.

It offers the following features:

  • Type of pump: Submersible pump
  • Material: Cast iron
  • Power source: Electric
  • Electricity type: Single-phase
  • Starting type: Automatic
  • Functions: Equipped with impeller and float switch
  • Package contents: 1 x Pump
  • Color: Blue

Technical Specifications:

  • Motor type: Electric
  • Power: 2200 W
  • Maximum speed (rpm): 2860
  • Voltage: 220 V
  • Protection class: IP 68
  • Maximum temperature: 35 °C
  • Discharge connection diameter: 2 inches
  • Suction connection diameter: 2 inches

Performance:

  • Maximum flow rate: 8 m³/h
  • Discharge height: 8 m
  • Suction depth: 8 m

Dimensions:

  • Weight: 12 kg
  • Height: 40 cm
  • Diameter: 270 mm
  • Cable length: 8 m

The package includes:

  • 1 x Submersible pump
  • 1 x 2-inch pipe, 20 m

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2197.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
20 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

101,47 €
5,50 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more