Skroutz.gr

DDT Single-Phase Well Water Pump 2.93hp
Submersible Water Pumps

DDT Single-Phase Well Water Pump 2.93hp

The DDT Professional WQCD is a submersible water pump with a power of 2200 W, ideal for pumping dirty water containing particles. It is used for transferring water from cesspits or flooded underground...

The DDT Professional WQCD is a submersible water pump with a power of 2200 W, ideal for pumping dirty water containing particles. It is used for transferring water from cesspits or flooded underground storage, as well as for suction in sludge or sand tanks. Perfect for installations where toilets cannot be connected to the sewage system.

General features:

  • ...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
88 49 €
89 Coins 89 Coins
Delivery by Fri, 03 Jul
5,50 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Do you want it with Free shipping to Skroutz Point?
Sent from Romania
From Dawer 3.9 (3)
3.9 (3 reviews)
Romania
20+ pieces
See Water Pumps on the page of Dawer
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The DDT Professional WQCD is a submersible water pump with a power of 2200 W, ideal for pumping dirty water containing particles. It is used for transferring water from cesspits or flooded underground storage, as well as for suction in sludge or sand tanks. Perfect for installations where toilets cannot be connected to the sewage system.

General features:

  • Type of pump: Submersible
  • Application: Domestic water
  • Material: Cast iron
  • Fuel type: Electric
  • Voltage: Single-phase
  • Starting type: Automatic
  • Power: 1100 W
  • Maximum speed: 2860 rpm
  • Voltage: 220 V
  • Protection class: IP 68
  • Maximum temperature: 35°C
  • Discharge connection diameter: 2 inches
  • Suction connection diameter: 2 inches

Performance data:

  • Maximum flow rate: 10 m³/h
  • Discharge height: 8 m
  • Suction depth: 8 m

Dimensions:

  • Height: 40 cm
  • Diameter: 270 mm
  • Cable length: 8 m
  • Weight: 12 kg

The pump's electric motor is made of corrosion-resistant cast iron, ensuring long-lasting durability.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2197.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m
Motor Rotation Speed
2860 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
10 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
20 m

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The DDT Professional WQCD is a submersible water pump with a power of 2200 W, ideal for pumping dirty water containing particles. It is used for transferring water from cesspits or flooded underground storage, as well as for suction in sludge or sand tanks. Perfect for installations where toilets cannot be connected to the sewage system.

General features:

  • Type of pump: Submersible
  • Application: Domestic water
  • Material: Cast iron
  • Fuel type: Electric
  • Voltage: Single-phase
  • Starting type: Automatic
  • Power: 1100 W
  • Maximum speed: 2860 rpm
  • Voltage: 220 V
  • Protection class: IP 68
  • Maximum temperature: 35°C
  • Discharge connection diameter: 2 inches
  • Suction connection diameter: 2 inches

Performance data:

  • Maximum flow rate: 10 m³/h
  • Discharge height: 8 m
  • Suction depth: 8 m

Dimensions:

  • Height: 40 cm
  • Diameter: 270 mm
  • Cable length: 8 m
  • Weight: 12 kg

The pump's electric motor is made of corrosion-resistant cast iron, ensuring long-lasting durability.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2197.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m
Motor Rotation Speed
2860 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
10 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
20 m

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

88,49 €
5,50 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more