Sunlu PLA+ 2.0 filament for FDM 3D printing supports printing speeds of up to 300 mm/s and has a flow rate up to 1.5 times higher than standard PLA. Its 1.75 mm diameter and ±0.02 mm tolerance help ensure consistent material feeding. It is designed to resist cracking and the wear of everyday use.
Compatible with SUNLU FDM 3D printers and almost all FDM 3D printers from other manufacturers, as well as SUNLU filament accessories and dryers.
- Material: PLA+ 2.0
- Color: White
- Diameter: 1.75 mm
- Diameter tolerance: ±0.02 mm
- Printing speed: Up to 300 mm/s
- Flow rate: Up to 1.5 times higher than standard PLA
- Packaging: Spool
- Density: 1.21 g/cm³
- Vicat softening temperature: 54 °C
- Heat deflection temperature (HDT): 53.8 °C
- Melting temperature: 164 °C
- Melt flow rate: 7.8 g/10 min
- Tensile strength: 53.4 MPa
- Elongation at break: 20.3 %
- Flexural strength: 81.8 MPa
- Modulus of elasticity: 2740 MPa
- IZOD notched impact strength: 19.8 kJ/m²
- Material
- PLA+ 2.0
- Colour
- White
- Diameter
- 1.75 mm
- Filament Packaging
- Spool
- Quantity
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.