Anycubic PC filament is suitable for printing parts that require impact and heat resistance, such as robot components, drone spare parts, and outdoor equipment. Prints have a smooth surface with a translucent finish and are resistant to UV radiation and weather conditions.
Use requires an enclosed chamber and drying. The built-in identification chip enables automatic recognition of print parameters with the Anycubic ACE Pro, while the reusable spool with a threaded connection helps reduce the risk of filament tangling.
- Material: PC
- Color: Black
- Weight: 1 kg
- Packaging: Spool
- Density: 1.2 g/cm³
- Melt flow rate: 15–20 g/10 min (270°C/2.16 kg)
- Melting point: 230°C
- Material stability: up to 122°C
- Heat deflection temperature (0.45 MPa): 110°C
- Water absorption: 0.25%
- Material stiffness: 2550±100 MPa
- Tensile strength: 65±6 MPa
- Tensile strength along the Z-axis: 25±7 MPa
- Elongation at break: 9±4%
- Young's modulus: 2900±150 MPa
- Flexural strength: 105±10 MPa
- Impact strength along the X-Y axis: 30±12 kJ/m²
- Printing conditions: Enclosed chamber and drying
- Drying temperature: 80°C for 6–8 hours
- Nozzle temperature: 270–290°C
- Build plate temperature: 100–120°C
- Printing speed: 40–250 mm/s
- Maximum volumetric flow rate: 12 mm³/s
- Minimum nozzle diameter: 0.2 mm
- Material
- PC
- Colour
- Black
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.