Skroutz.gr

SSD 256GB M.2 Type with PCI Express 4.0 Connection
SSD Hard Drives

SSD 256GB M.2 Type with PCI Express 4.0 Connection

The Transcend MTE410S SSD has a capacity of 256 GB, an M.2 2242 form factor, and a PCI Express 4.0 x4 NVMe interface. Its single-sided design is intended for thin, compact devices such as ultrabooks,...

The Transcend MTE410S SSD has a capacity of 256 GB, an M.2 2242 form factor, and a PCI Express 4.0 x4 NVMe interface. Its single-sided design is intended for thin, compact devices such as ultrabooks, laptops, tablets, and handheld gaming devices. It uses 3D NAND Flash memory with SLC architecture and a DRAM-less design, while supporting SLC caching and LDPC...

See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • See all
160 79 €
Delivery Mon, 16 Nov - Fri, 20 Nov
2,50 € to a Skroutz Point
Do you want it with Free shipping?
Sent from Poland
From Ovolt 4.7 (11)
4.7 (11 reviews)
Poland
5 pieces
See Hard Drives on the page of Ovolt
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The Transcend MTE410S SSD has a capacity of 256 GB, an M.2 2242 form factor, and a PCI Express 4.0 x4 NVMe interface. Its single-sided design is intended for thin, compact devices such as ultrabooks, laptops, tablets, and handheld gaming devices. It uses 3D NAND Flash memory with SLC architecture and a DRAM-less design, while supporting SLC caching and LDPC ECC error correction.

Sequential read speeds reach up to 3,300 MB/s, and sequential write speeds reach up to 1,600 MB/s. Random read performance reaches up to 190,000 IOPS, while random write performance reaches up to 370,000 IOPS. Write endurance is rated at 150 TBW, and the mean time between failures (MTBF) is 2 million hours.

  • Capacity: 256 GB
  • Form factor: M.2 2242
  • Interface: PCI Express 4.0 x4 NVMe
  • Read speed: Up to 3,300 MB/s
  • Write speed: Up to 1,600 MB/s
  • Random read: Up to 190,000 IOPS
  • Random write: Up to 370,000 IOPS
  • NAND Flash type: SLC
  • Design: Single-sided, DRAM-less
  • Caching: SLC caching
  • Error correction: LDPC ECC
  • Write endurance: 150 TBW
  • Mean time between failures: 2 million hours

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
256 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
PCI Express 4.0

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.
NVMe
Yes

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
SLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

SLC
Offers the highest speed and durability, but is used mainly in professional SSDs due to its high cost.

Dimensions

Form Factor
M.2 (Type 2242)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2242)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Performance

Read Speed
3300 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
3300 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Transcend MTE410S SSD has a capacity of 256 GB, an M.2 2242 form factor, and a PCI Express 4.0 x4 NVMe interface. Its single-sided design is intended for thin, compact devices such as ultrabooks, laptops, tablets, and handheld gaming devices. It uses 3D NAND Flash memory with SLC architecture and a DRAM-less design, while supporting SLC caching and LDPC ECC error correction.

Sequential read speeds reach up to 3,300 MB/s, and sequential write speeds reach up to 1,600 MB/s. Random read performance reaches up to 190,000 IOPS, while random write performance reaches up to 370,000 IOPS. Write endurance is rated at 150 TBW, and the mean time between failures (MTBF) is 2 million hours.

  • Capacity: 256 GB
  • Form factor: M.2 2242
  • Interface: PCI Express 4.0 x4 NVMe
  • Read speed: Up to 3,300 MB/s
  • Write speed: Up to 1,600 MB/s
  • Random read: Up to 190,000 IOPS
  • Random write: Up to 370,000 IOPS
  • NAND Flash type: SLC
  • Design: Single-sided, DRAM-less
  • Caching: SLC caching
  • Error correction: LDPC ECC
  • Write endurance: 150 TBW
  • Mean time between failures: 2 million hours

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
256 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
PCI Express 4.0

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.
NVMe
Yes

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
SLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

SLC
Offers the highest speed and durability, but is used mainly in professional SSDs due to its high cost.

Dimensions

Form Factor
M.2 (Type 2242)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2242)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Performance

Read Speed
3300 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
3300 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

160,79 €
2,50 € to a Skroutz Point

Transcend