Sigmafast 20 Anti-Rust Paint for Rust 20L - RAL 5015

Suitable for painting rusty iron surfaces.

A minimum film thickness of 150 microns (2-3 coats) is required for full protection of the painted surface.

Used and recommended by professionals in the anti-rust industry. Ideal for workshop protection.

Main advantages of the paint:

• Excellent adhesion even on rust
• High resistance to corrosion and moisture
• Suitable for weld protection
• Can be recoated with most alkyd, chlorinated rubber, vinyl, epoxy, polyurethane, and automotive paints

Technical data:

• Touch dry: 15 minutes
• Application of second coat at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage rate at 50 μm: 11 m²/L
• Gloss: Matte
• Recommended thinner: Sigma 21-06 or Solid Thinner 06

Use of ABE1P3 filter mask is recommended.

For permanent protection over years, the surface must be scraped, washed, and degreased with Solid Cleaner 05 before painting.

For surface protection over 15 years, it is recommended to use Sigmacover 280 two-component chemical curing paint as a primer and Sigmafast 210 two-component polyurethane as a topcoat.

Enhanced performance and greater protection with the same thickness in the improved version of Sigmafast 210 HS.