Sigmafast 20 Anti-Corrosive Paint for Rust 20L - RAL 7043

Suitable for painting rusty (corroded) steel surfaces. A minimum film thickness of 150 microns (2-3 coats) is required for full protection of the painted surface.

• Excellent adhesion even on rust
• Outstanding resistance to corrosion and water penetration
• Suitable for protection of welds
• Can be recoated with most alkyd, chlorinated rubber, vinyl, epoxy, polyurethane, and automotive paints

Technical Data:

• Touch dry: 15 minutes
• Recoat time at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage rate at 50 μm: 11 m²/L
• Gloss: Matt
• Recommended thinner: Sigma 21-06 or Solid Thinner 06

To achieve lasting protection for years, the surface must be sanded, washed, and degreased with Solid Cleaner 05 before painting.

Use of ABE1P3 filter mask is recommended.