Sigmafast 20 Anti-Corrosion Paint for Hardwoods 20L - RAL 3000

Quality Tested at Sea

Suitable for painting hard (rigid) steel surfaces.

A minimum film thickness of 150 microns (2-3 coats) is required for complete protection of the painted surface.

Used and recommended by professionals in the field of anti-corrosion protection. Ideal for protecting workshops.

Main Advantages of the Paint:

• Excellent adhesion even on hardwoods
• Extreme resistance to corrosion and water penetration
• Suitable for protecting welded joints
• Can be recoated with most alkyd, chlorinated rubber, vinyl, epoxy, polyurethane, and automotive paints

Technical Data:

• Touch dry time: 15 minutes
• Second coat application at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage at 50 μm: 11 m²/L
• Gloss: Matte
• Recommended thinner: Sigma 21-06 or Solid Thinner 06

For durable protection lasting years, the surface must be shaped, washed, and degreased with Solid Cleaner 05 before painting.

Use of an ABE1P3 filter mask is recommended.