Sigmafast 20 Anti-Corrosion Paint for Rust 20L - RAL 6005

Quality tested at sea

Suitable for painting rusty metal surfaces.

A minimum film thickness of 150 microns (2-3 coats) is required for full protection of the painted surface.

Used and recommended by professionals in the field of anti-corrosion protection. Ideal for the protection of workshops.

Main advantages of the paint:

• Good adhesion even on rust
• High resistance to corrosion and water penetration
• Suitable for the protection of welded joints
• Can be recoated with most alkyd, chlorinated resin, vinyl, epoxy, polyurethane, and automotive paints

Technical data:

• Tack-free time: 15 minutes
• Second coat application at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage rate at 50 μm: 11 m²/L
• Gloss: Matte
• Recommended thinner: Sigma 21-06 or Solid Thinner 06

For long-lasting protection over many years, the surface must be sanded, washed, and degreased with Solid Cleaner 05 before painting.

The use of ABE1P3 filter mask is recommended.