Cekol GS20 gypsum adhesive for drywall, 10 kg

Adhesive for bonding drywall, plasters, and gypsum blocks, characterized by excellent adhesion. It is also used for covering cracks and scratches on wall and ceiling surfaces. Cekol GS20 is a product based on polymer compounds, white inorganic fillers, and modifying agents. It is recommended exclusively for indoor use.

Product advantages and features:

• High strength and quality
• Thanks to the carefully selected formula, it has high resistance to sagging
• Crack-resistant and sufficiently elastic
• Can also be used on cracks or scratches
• Completely eco-friendly and free of harmful substances

Substrate preparation: Drywalls must be firmly and securely installed. Before application, clean cracks thoroughly. In case of cut edges, widen the crack and carefully remove dust. Non-original panel edges must be carefully pre-primed with a deep penetrating primer.

Application: After mixing, apply the product to the surface with stainless steel or plastic tools. Carefully fill the crack and allow to dry. If necessary, repeat the operation after approximately 24 hours. After drying, surface corrections can be made with mesh or sandpaper.

Storage: Store in the original packaging in dry and dark places, away from heat sources. Protect from overheating and frost.

Parameters:

• Brand: Cekol
• Capacity: 10 kg
• Maximum layer thickness: approximately 10 mm
• Efficiency: 35 kg/m²
• Drying time: Depends on layer thickness and environmental conditions; considered 10 mm per day
• The product has hygiene certification

Use: Adhesive for drywall and plaster