Product description: ATLAS OK 5kg tile adhesive is a very versatile C1TE class adhesive emulsion for ceramic tiles, containing polypropylene and cellulosic fibers, enhancing strength, adhesion to the substrate, and resistance to chemical and microbiological contamination. Suitable for bonding bricks, glazed tiles, porcelain, ceramic mosaics, clinker, and concrete tiles.

It can be applied on floors and subfloors made of cement and anhydrite, concrete, cement and lime-cement plasters, as well as on various types of walls.

Double strength of fibers and polymers

• For bonding bricks, glazed tiles, porcelain, ceramic mosaics, clinker, and concrete tiles
• High flexural resistance thanks to a selected formula
• Increased mechanical strength
• Grouting possible after only 12-24 hours
• Fiber-reinforced, the only C1 class adhesive for tiles up to 60 cm x 40 cm

Features: OK ELASTIFIED adhesive is a mixture of the highest-quality cement base, fibrous aggregates, and a special composition of modifying agents, including polymers. The excellent formula allows the product to achieve the highest technical parameters in its category and is widely used in residential construction.

The technology used in the mortar guarantees a wide range of adhesive layer thickness from 2 to 10 mm, allowing thin-layer installation of coverings even on uneven substrates and facilitating the finishing of mineral substrates. The extended open time allows tiles to be laid on the adhesive up to 30 minutes after application to the substrate, enabling application over a larger area at once and minimizing working time. The reduced sagging makes overhead ceramic installation easier and prevents cut tiles from slipping on the exposed surface.

Wide range of applications in residential construction:

• Bathrooms
• Kitchens
• Hallways
• Garages
• Stairs

Parameters:

• Brand: Atlas
• Capacity: 5 kg
• Average consumption: 1.7-3.4 kg/m²
• Adhesion: 0.5 N/mm²
• Layer thickness: 2-10 mm
• Properties: Fiber-reinforced
• Application temperature: From 5°C to 30°C
• Strength: 0.5 N/mm²
• Drying time: 12 hours, walkable after 24 hours

Application: Adhesive for bricks, glazed tiles, porcelain, ceramic mosaics, clinker, and concrete tiles.