Concrete

Planfix Grey Resin Cement Putty 5 Kg Isomat

Isomat’s gray Planfix cement putty is a fine-grained, resin-modified repair mortar for smoothing and repairing exposed concrete, indoors and outdoors. When mixed with water, it forms a workable paste...

Isomat’s gray Planfix cement putty is a fine-grained, resin-modified repair mortar for smoothing and repairing exposed concrete, indoors and outdoors. When mixed with water, it forms a workable paste used to seal cracks, pores, and voids in concrete. It can also be applied as a thin smoothing layer instead of cement mortar or plaster.

It is classified as a...

See Description & Specifications See Description & Specifications
6 35 €
Delivery by Wed, 25 Nov
2,50 € to a Skroutz Point
or   3,50 €   shipping cost
From Tehnobeton 5.0 (6)
Κοζάνη, Κοζάνης
9 pieces
See Construction Materials on the page of Tehnobeton
Is delivery to a floor free?

Yes, we will carry it up to the floor for you, without any restrictions.

Questions

Description & Specifications

Isomat’s gray Planfix cement putty is a fine-grained, resin-modified repair mortar for smoothing and repairing exposed concrete, indoors and outdoors. When mixed with water, it forms a workable paste used to seal cracks, pores, and voids in concrete. It can also be applied as a thin smoothing layer instead of cement mortar or plaster.

It is classified as a PCC R2-type concrete repair mortar under EN 1504-3 and has a Euroclass A1 reaction to fire. Before application, the substrate must be stable, clean, free of dust, grease, and loose material, and thoroughly dampened. Gradually add the powder to water while mixing continuously, at a 3:1 ratio by volume, until a homogeneous paste forms. Apply at temperatures between +5 °C and +30 °C. During the summer months, dampen the material after application to prevent it from drying out.

  • Form: Powder
  • Color: Gray
  • Weight: 5 kg
  • Pot life: 4–7 h at +20 °C
  • Consumption: Approx. 1.3 kg/m² per mm of layer thickness
  • Water requirement: 6.0 l per 25 kg bag
  • Compressive strength: > 20.00 N/mm²
  • Flexural strength: > 6.00 N/mm²
  • Adhesion: ≥ 1.70 MPa
  • Chloride content: 0.00 %
  • Capillary water absorption: 0.39 kg/m²·h^0.5
  • Standard: EN 1504-3, type PCC R2
  • Reaction to fire: Euroclass A1

Manufacturer

Weight
5 kg
Pressed Cement Mortar
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

6,35 €
2,50 € to a Skroutz Point
or   3,50 €   shipping cost