The Unimac 691180 petrol-powered branch shredder chips branches up to 100 mm in diameter using a drum fitted with two reversible Cr12MoV blades. Its 212 cc single-cylinder 4X/OHV engine is started with a recoil starter and drives the blades via two Kevlar belts and a centrifugal clutch. Its output ranges from 3 to 5 m³/h.
The discharge chute can be adjusted through 360° and up and down. For operator safety, it features an emergency system and a switch on the hopper, while its pneumatic tyres make it easier to move.
- Power source: Petrol
- Engine displacement: 212 cc
- Engine type: Single-cylinder 4X/OHV
- Starting system: Recoil starter
- Chipping capacity: 3–100 mm
- Output: 3–5 m³/h
- Drum: Fitted with two reversible Cr12MoV blades
- Blade dimensions: 150 × 55 × 5 mm
- Chipping method: Roller cutting
- Hopper inlet opening: 360 × 340 mm
- Blade inlet opening: 155 × 140 mm
- Discharge chute adjustment: 360° and up and down
- Blade bearings: Greaseable
- Blade clearance adjustment: Yes
- Blade rotation speed: 2,400 rpm
- Drive system: Two Kevlar belts and a centrifugal clutch
- Safety system: Emergency stop and a non-latching switch on the hopper
- Tyres: Pneumatic, 145/70-6
- Collection: On the ground
- Fuel consumption: 1.6 l/h
- Fuel tank capacity: 3.6 l
- Oil sump capacity: 0.6 l
- Oil type: SAE 15W-50
- Low oil sensor: Yes
- Machine dimensions: 172 × 60 × 108 cm
- Machine weight: 102 kg
Dimensions
- Power Source
- Gasoline
- Self-Driving
- No
Technical Specifications
- Collection Method
- Ground
- Cutting System
- -
- Cutting efficiency
- -
- Shredding Capacity
- 100 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.